Steve Weisman

Just put an S-60 strange rear end in with Spohn ajustable lower control arms,adj torque arm,adj panhard bar,and a 1" sway bar. My question is when I start or stop fast it seams like the rear end is moving back and forth? Also when I pull in to my Garage with like a 1" lip of concreate it also feels like it shifts again. Any idea on what ajustments I need to make??? Thanks Steve ps there my be an attachment, not sure if its there.

99Bluz28

iTrader: (35)

Check to make sure all the bolts are tight . If that's not it check to make sure all the bolts are the correct size so you don't have play in the suspension.

Steve Weisman

Th;anks, the bolts up front on the torq arm were not tight, The torq arm moved back and forth up front and the vibration was felt on the floor board. Thanks , Steve

transam69230

iTrader: (49)

Your torque arm might clearance itself as well on the bottom side of you car FYI. It put a hole in the bottom of my friends car, and banged itself clear on mine! At least it don't make any noise now!