Pro_built7

iTrader: (9)

Hey guys,
I've searched but couldn't find what I'm looking for.

Can you guys direct me to the best spring mounts for the fronts and where I can buy them.
I don't need the isolater only the mount that actually holds the spring/shock to the top of the wheel well.

? ??

Moog.. autozone... GM

? ? ??

Thanks !

BobDoLe

iTrader: (11)

first i'd check with the dealership... then gmpartsdirect.com
if its #9 in this picture, gmpartsdirect charges $120 +shipping for that.
part numbers
22146933 for left and 22146934 for right

http://www.trademotion.com/partlocat...layCatalogid=0

Pro_built7

iTrader: (9)

ya it's number 9 thanks man.

You've got to be kidding. 120$ a PIECE..

WHAT THE @#$@#$

Is there a good aftermarket anywhere.. Moog?

Somebody give me some input here

Pro_built7

iTrader: (9)

This is what I've found on rock auto:

KYB, ACdelco, Moog, raybestos ???

Link:

http://www.rockauto.com/catalog/raframecatalog.php






ugh..

therealcreeper

iTrader: (37)

GM is your best bet. there's been a few people on here who have had their moog and kyb ones fail pretty quickly. not sure if those people forgot to put the top metal/rubber piece back on top under the nut though, seems like that would stop the center from pulling through but maybe not.

DaddySS

Or at least go with the AC Delco - a few dollars more but worth it IMHO

ACDELCO Part # 501149 {SUSPENSION MOUNT #88946383}
MOUNT,FRT SUSP STRUT RIGHT HAND; 2 DOORS
MOUNT,FRT SUSP STRUT RIGHT HAND; CONVERTIBLE
- Stocked in outlying warehouse--shipping delayed up to 1 business day

$78.79 $0.00 $78.79



ACDELCO Part # 501148 {SUSPENSION MOUNT #88946382}
MOUNT,FRT SUSP STRUT LEFT HAND; 2 DOORS
MOUNT,FRT SUSP STRUT LEFT HAND; CONVERTIBLE
* Non-stock item--shipping delayed up to 12 business days

$75.79 $0.00 $75.79

pjb

iTrader: (2)

I've seen people refer to that diagram before, but its not really what the setup looks like at all.

Pro_built7

iTrader: (9)

Ya but it's the same idea..

I've also had a few offers on used GM mounts.

How do you guys feel about buying used mounts ?

pjb

iTrader: (2)

with any used parts you have to weigh the benefits. If the part fails what damage will be done. if the part fails how easy is it to replace. how much is a new part.

new parts is almost always a better idea.

therealcreeper

iTrader: (37)

I just replaced mine with used GM ones when I redid the front for the 2nd time

whtnuklz

iTrader: (8)

I got mine from Napa. I would stay away from anything like that from autozone.

Pro_built7

iTrader: (9)

Thanks for all the replies so far guys,


Do you guys think that putting used GM mounts on will do anything to my brand new koni's ?

I was just thinking maybe used mounts would make the dampener rod bend funny under load...

let me know your thoughts !

BobDoLe

iTrader: (11)

just in my opinion - i think used is fine. after 90K+ miles, i reused mine on my precious new konis. unless they're directly damaged (like from a wreck), i can't see how you could go wrong with a used original gm mount.

LilJayV10

iTrader: (39)

Strut mounts for some reason, doesn't matter what type of car it is they are expensive.

Pro_built7

iTrader: (9)

Thats sort of the way I'm leaning, I'm sure a decent looking used GM mount is better than a new kyb/monroe.

I can't justify spending that much on mounts brand new.

But most of all I'm worried about a used/crappy mount bending the dampening rod (somehow) on my new little koni gemstones.

BassProCamaro97

iTrader: (10)

Stay away from the replacments shock mounts. I bought a set of Monroe mounts and they didn't even line up!

Just bite the bullet and buy new ones from GM. You can probably get away with used ones but thats up to you. I'd suggest used GM's over any aftermarket piece.

~Jim~

Pro_built7

iTrader: (9)

Thanks man, Thats what I needed to hear.

I'll prolly get some used GM ones if I can.

Thanks for all the input guys !

MadIceV8

iTrader: (12)

I purchased a monroe.... never again. Now I'll be replacing it when I get some time. Seemed like a quality piece until you go to install it.

Breathing Fire

I used the ones that carquest had. They fit and were built the same as the GM ones I took out. Same steel plate design which is what I was looking for.

leadfoot4

iTrader: (1)

What problems did you have?? I installed a new pair of Monroes, when I installed new shocks/springs, a couple of months ago. Finally the snow melted, we got some rain that washed the salt off the road, and I took the car for a short ride.

I heard a "clicking" noise, and decided to take apart the one side to look at one of the upper a-arm bushings, and one of the threaded inserts came loose from the rubber part, and I had trouble getting the bolt out....