Replacement panhard bolts from the hardware store?
#1
Banned
Thread Starter
iTrader: (12)
Join Date: Sep 2011
Location: Wisconsin
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Replacement panhard bolts from the hardware store?
Ok so I got the LCA's in, PITA and luckily I bought a new hardware kit for them earlier. But now I got the old panhard rod out, and of course the bolts broke off from being seized in there.
I know you can get the replacement hardware online, but I need it ASAP. Can panhard bolts be found at the hardware store? I've got a lot of choices near me, ACE, Menards, Home Depot, Lowes, True Value, ect. Since it's kind of a special stepped bolt I'm hoping I'm not screwed and have to buy online and wait.
Anyone deal with this before and know where I can get this hardware ASAP?
I know you can get the replacement hardware online, but I need it ASAP. Can panhard bolts be found at the hardware store? I've got a lot of choices near me, ACE, Menards, Home Depot, Lowes, True Value, ect. Since it's kind of a special stepped bolt I'm hoping I'm not screwed and have to buy online and wait.
Anyone deal with this before and know where I can get this hardware ASAP?
#3
Banned
Thread Starter
iTrader: (12)
Join Date: Sep 2011
Location: Wisconsin
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Everything on the rear was a PITA because the bolts were seized. So I had to cut torch and hammer half of them out.
Yeah it's common sense to go in and try and find the same ones lol.... duh They are special bolts, 2 different thicknesses stepped and threads only half way up. I know many people have probably dealt with this so I just wanted to see if someone could tell me if they were able to get them from a hardware store or if you can't find them to save me the trouble of driving around all day
Yeah it's common sense to go in and try and find the same ones lol.... duh They are special bolts, 2 different thicknesses stepped and threads only half way up. I know many people have probably dealt with this so I just wanted to see if someone could tell me if they were able to get them from a hardware store or if you can't find them to save me the trouble of driving around all day
#4
Banned
Thread Starter
iTrader: (12)
Join Date: Sep 2011
Location: Wisconsin
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Hmm.. couldn't I just use bolts that are the size of the thicker portion of the stockers throughout? I'm thinking if I am able to find one strong enough, all that matters are the threads. I don't see the size stepping being there for a reason, so could I just use a thicker bolt with the same thread pattern..?
#6
TECH Fanatic
iTrader: (7)
You're not going to find a direct replacement for that at any hardware store. Most won't even carry a metric bolt in that size, much less one with the tapered shank. You can temporarily replace it with a smaller grade 8 bolt. I find OSH and Ace Hardware have the best selection of grade 8.
Go to the junkyard for that bolt.
Go to the junkyard for that bolt.
#7
Hmm.. couldn't I just use bolts that are the size of the thicker portion of the stockers throughout? I'm thinking if I am able to find one strong enough, all that matters are the threads. I don't see the size stepping being there for a reason, so could I just use a thicker bolt with the same thread pattern..?
ramey
Trending Topics
#9
Banned
Thread Starter
iTrader: (12)
Join Date: Sep 2011
Location: Wisconsin
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the link too sjsingle1, that's what I ended up doing. I got 2 of those 9/16 bolts, 2 snug fitting washers, and 2 nylock bolts, best I could get was grade 8. Got a 9/16 drill bit, gonna drill out both the mounting holes and use the new hardware. Should fit nice and snug
Thanks for the help
Thanks for the help