bad_408_vert

iTrader: (6)

Already have the shocks and springs.

So far I know but don't know how much of each.

Front:
Upper & Lower control arms bushings (4)?
Sway bar bushings (2)?
Sway bar End Links (2)?
Tie Rods(2)?
Ball Joints Lower & Upper ?

Rear:
Lower Control Arms bushings (2)?
Sway bar bushings (2)?
Any end links ?

what am I missing and how much of all of these do I need?

Fosnot

iTrader: (15)

For the front there should be 4 ball joints total. two per side, upper and lower.

Also you might want to check the bushings (or rod ends, or poly if you have an aftermarket one) for the panhard bar.

BADFNZ

iTrader: (19)

Check out this thread:

https://ls1tech.com/forums/suspensio...back-dead.html

bad_408_vert

iTrader: (6)

whoa! many thanks for that link!