Fed Up!!!
#1
Staging Lane
Thread Starter
Join Date: Mar 2012
Location: De Soto, IL
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Fed Up!!!
I am so fed up with my suspension i could BFHI! I have changed (on both sides for all parts) Lower & Upper Ball Joints, LCA bushings, Outer Tie Rod Ends. I have checked the wheel bearings, and everything on the brakes as well. All of this was done trying to fix a knocking sound that would come out of my passenger side suspension. Changed one thing at a time and would go out for a test drive and everytime it would produce the same knocking sound. It makes the loud popping knocking sound when i back up and turn either direction or when I come to an intersection and stop. It pops right before the car comes to a full stop.
Please help me!!!
I'l at a loss now all thats left is the struts or coil springs and idk if that could produce the noise I'm hearing
Please help me!!!
I'l at a loss now all thats left is the struts or coil springs and idk if that could produce the noise I'm hearing
#3
Staging Lane
Thread Starter
Join Date: Mar 2012
Location: De Soto, IL
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
#6
Staging Lane
Thread Starter
Join Date: Mar 2012
Location: De Soto, IL
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
#7
On The Tree
iTrader: (4)
Join Date: Oct 2011
Location: North Platte, Ne
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Im currently redoing my suspension aswell. did the rear today and the control arm bushings were rotted bad. Bout 1/8" gap from contacting the bushing housing. Also replaced de carbons with bilsteins. Problems on rear are gone now. Doing front hopefully next weekend.
It could be your strut mount isolator starting to rust through? My driver side makes a pop when I push down on the car and it sounds like its coming from the top of the spring/strut assembly inside the wheel well
It could be your strut mount isolator starting to rust through? My driver side makes a pop when I push down on the car and it sounds like its coming from the top of the spring/strut assembly inside the wheel well