Mark A. Rogalski

iTrader: (1)

Hi All,

I'm looking for a shop in the U.S. that can professionally rebuild an existing rack and pinion. I'm having a hard time finding a place that specializes in this type stuff. A place that uses top quality parts/pieces and such. Any ideas?

I want my OEM rack rebuilt because it's the low ratio, the one at 2.14 turns lock to lock. The remans from AC/Delco and others are just the standard replacement racks for V8 cars. It's not possible to buy a reman off the shelf if your WS6 has this very low ratio rack.

scj

iTrader: (89)

TurnOne.

sjsingle1

iTrader: (1)

i thought all racks had the same ratio?

BMR Tech2

iTrader: (5)

Contact TurnOne. They can rebuild it and, I believe, alter your ratio.

- Kevin

Mark A. Rogalski

iTrader: (1)

Well TurnOne must be the place. I will call them today. I found them a few days ago but since I could not find any similar shops on the net, I just had to ask. I thought Google was broken or something. Appears there's not much need for shops like this because of the mass market reman companies.

Thanks All.

garygnu

you mite be able to make a socket to remove the rack ends .you can get a rebuild kit and do it your self.