squirrel masta

just woundering what would be the least amount of drop spring,my problem is i have seroius mods and ground clearence is an issue,but with the smoothies on there and the 315s there is a lot of gap,just wanted a little less gap but still have good clearance

Silly02SS

bmr sprins only lower about an inch, or you could get the adjustable HAL QA1's

squirrel masta

thanx silly

1BadMoFo

iTrader: (1)

let me know what you go with please, and if you have any issues after putting them on. I have 315's on back also, as you'll see in a thread a couple of posts up...i'm worried about potential problems with lowering. I'll probalby go with the least amount of lowering possible, such as the BMR's

Silly02SS

my friend has 17x11's with 315's and eibach springs and he had to hammer in the fenderwells a little b/c it rubbed on bumps

1BadMoFo

iTrader: (1)

I can deal with that, no biggie there, just recoat it with underspray and can't tell.