flat-top

I have to replace the stock front rotors on the 98 SS. It's a garage queen. Not doing any track day's, not racing, not doing much of anything.

I see NAPA has them for $37 each.

are these decent enough?
is there something better for a LITTLE more money?

thanks!
Jeff

JakeFusion

iTrader: (7)

WS6Store Rotors are $195 for the set. Black zinc coated. Drilled, slotted, drilled and slotted, plain.

Brakemotive is like $175 I think w/pads. Zinc coated as well. Can get them slotted or drilled or drilled and slotted.

sjsingle1

iTrader: (1)

auto zone..........ya gets what ya pay for !

Spartan7

iTrader: (7)

Not anymore. Every brake rotor I've seen has been made in China. I am running Autozone rotors on the rear though.

transwiz

iTrader: (26)

When it comes to brakes I don't like to go for the cheep stuff. I want the ability to stop good without any problems. Cheep rotors warp quickly. Spend the money and get good ones. You get what you pay for.

LS1121

iTrader: (17)

I bought drilled an slotted on ebay a few years ago for I think $120 shipped from some guy in CA. and they have worked flawlessly. Sometimes ya just hit on a Great deal.

Grimes

iTrader: (3)

If you're not doing anything nuts, then just go with the Napa ones. My car is a daily driver, and I have about 50k miles on cheap parts store ones, and they have held up fine.

RedHotG8

iTrader: (1)

I have premium autozone rotors and they stop smooth after many years of hard stopping.

justin hover

Brake motive..

JakeFusion

iTrader: (7)

I wouldn't call the WS6Store rotors low quality.

Brake Motive would be another good choice.

RedHotG8

iTrader: (1)

W-body rotors are from china too, they are basically all the same unless you get Brembo or the really high priced rotors.

Zlow28

iTrader: (11)

i dont think you can beat brakemotive's prices. Im going with them for my ws6.

lemons12

iTrader: (71)

Running brakemotive's on both my TAs with zero issues.

94 White T/A

I found the WS6 store rotors to be the best deal and they work great

bayer-z28

iTrader: (14)

^ Yeah. I have their set.

Spartan7

iTrader: (7)

Funny you should mention that. When I was helping my brother slap on his Brembo rotors a couple years ago, the box said "Made in China". Needless to say, he was kinda pissed about that.

RedHotG8

iTrader: (1)

WTF I guess they are all made in China now. No wonder I'm selling so many parts, my products are still made by me in the USA. I have been contacted by Chinese companies that want to manufacture my parts, but I'm not giving them a cut of my profits.