Eibach Pro Kit installed
11-12-2013, 11:01 AM
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: Corona, CA
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Eibach Pro Kit installed FINALLY lowered my car.
I got some 93-97 LT1 Pro kit springs from another member here for a steal.
Installed them this past weekend along with new ball joints and tie rod ends (they were shot).
I left the stock de carbons on there because I want to get the Koni STR-R (i think thats what they are called).
The ride isnt too bad, its definetly stiffer but it handles 10000x better than it did. I'm sure the new ball joints and tie rods helped but body roll is almost non existant.
I ordered some Founders Performance LCA & relocation brackets to correct the geometry for the rear. I am also going to order the panhard bar soon too (it isnt terribly off centered as it sits)
here is the new stance
I got some 93-97 LT1 Pro kit springs from another member here for a steal.
Installed them this past weekend along with new ball joints and tie rod ends (they were shot).
I left the stock de carbons on there because I want to get the Koni STR-R (i think thats what they are called).
The ride isnt too bad, its definetly stiffer but it handles 10000x better than it did. I'm sure the new ball joints and tie rods helped but body roll is almost non existant.
I ordered some Founders Performance LCA & relocation brackets to correct the geometry for the rear. I am also going to order the panhard bar soon too (it isnt terribly off centered as it sits)
here is the new stance
11-21-2013, 09:59 PM
#4
Teching In
iTrader: (2)
Join Date: Oct 2013
Location: GA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
wow those do look good, more pics in better lighting please! i have lowering springs on my 98 that came with the car and i was on the lookout for something that will lower the car a little more, these might be the ticket.
