problems with SLP LEVEL II springs
#1
Teching In
Thread Starter
Join Date: Sep 2010
Location: Netherlands (Europe)
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
problems with SLP LEVEL II springs
i had replaced my orginal springs with SLP Level II (300/450 springrate) last winter.
so i drove my car for the first time after the winter, and i heard a problem (metal to metal)
so i looked at my front springs and i see the spring is hitting the upper bolt form the upper control arm, this problem is on both sides.
i checked it several times if i did make a mistake putting the spings on, but i can't see anything wrong.
do i miss something ?
it's the left bolt on the picture
so i drove my car for the first time after the winter, and i heard a problem (metal to metal)
so i looked at my front springs and i see the spring is hitting the upper bolt form the upper control arm, this problem is on both sides.
i checked it several times if i did make a mistake putting the spings on, but i can't see anything wrong.
do i miss something ?
it's the left bolt on the picture