Bmr short torque arm question
12-27-2014, 08:44 PM
#1
Teching In
Thread Starter
Join Date: Sep 2012
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Bmr short torque arm question I got a 9 inxh with suspenion off a buddy has the bmr short torque arm but didn't come with the weld in part it mounts to now I'm wonder if I can just use the tunnel brace mount tht umi or spoh sells instead of the getting the weld in one please let me know if they arm same lengths n Thous mounts wil work
12-29-2014, 12:49 PM
#2
The Weld in crossmember normally goes right in the same area as a chassis brace, so lengths wise they may work. However, the mounting may be a little different as our short torque arm uses a regular polyurethane bushing like a lower control arm. Most other short arms use a rod end which is much narrower. The Spohn piece looks like it may work, but I cannot say for sure. I do not know of anyone who has tried it. We also have a new bolt in short torque arm setup that will be available within the next couple of days that bolts in place of the chassis brace and offers an adjustable instant center mounting provision.
