nascardude56

iTrader: (6)

I am getting ready to put CTS-V brakes and Z06 rotors on my 2002 Camaro. When it comes to wheel fitment, it looks like something 18x9.5 +40mm is the right spec to clear the brembos, but I see less aggressive wheels clearing c6z wheels like the Ace Slick. These are 18x9.5 +53mm offset and they clear c6z brakes fine. If these clear c6z brakes on a Corvette, will they clear CTSV brakes on a fbody? I'm trying to think of any differences between the two but I dont believe the mounting should be any different.

STANG KILLA SS 2

iTrader: (6)

spoke angle is different on +53 vs +40. they probly wont clear without a spacer.
im running +40 spypers on my CTSVs

also the lateral placement of the caliper bracket on a f-body is probly slightly different than corvette. hence why they clear on one and not the other

STANG KILLA SS 2

iTrader: (6)

also use 5th gen rotors, not c6Z rotors. your pads will over hang the rotor surface on c6Z. and you lose 25-35% of your braking friction surface. not to mention the odd wear, which can cause squeeling on the inner edge