BrokenTorque arm mount
07-02-2004, 04:04 PM
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Front Royal, VA
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
BrokenTorque arm mount Today I was out in my car and I got on it in first and barely in second. Get to the next light and as I am putting it into first I hear this CLUNK 
. I thought for sure my driveshaft was now laying under the car but to my surprise it moved under it's own power so I pulled into a parking lot. Everything appeared to be intact so I drove home a few miles listening to this clunking trying to figure out what it was. Well got it up on the ramps and this is what I found.
It appears that the top bolt snapped off. Now to get the rest of the bolt out will be the fun part.
I guess now would be a good time to buy the BMR torque arm because I have exceeded the limits of the stock torque arm but I am confused as to is this normal for the bolt to snap? Has anyone else seen this?
Thanks,
Tom
. I thought for sure my driveshaft was now laying under the car but to my surprise it moved under it's own power so I pulled into a parking lot. Everything appeared to be intact so I drove home a few miles listening to this clunking trying to figure out what it was. Well got it up on the ramps and this is what I found. It appears that the top bolt snapped off. Now to get the rest of the bolt out will be the fun part.
I guess now would be a good time to buy the BMR torque arm because I have exceeded the limits of the stock torque arm but I am confused as to is this normal for the bolt to snap? Has anyone else seen this?Thanks,
Tom
