You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
which port on master cylinder goes to the rear brakes?
I have C5 brakes and LS1 rear brakes on my 71 firebird. I also have a LS1 master cylinder, currently i have the port on the master cylinder closest to the firewall going to the rear brakes nad the port closest to the radiator going to the front, but recently I was informed this coudl be incorrect. Is this true? is the rear port for the front brakes? Also the brakes feel pretty good, I have hydroboost also. Could this cause a problem? obviously i will just redo the lines if it is wrong. Thanks!!
I just did some searches and it seems most people put their line locs in the rear port, meaning the rear port is for the front brakes, meaning mine is backwards, I am wondering though, if the master cylinder really cares front/rear? If it puts out the exact same pressure front and rear?
Disregard my Post Man. I told you erroneous info . I got confused and edited it and it came up wrong. i am now deleting that stuff.
Youare correct the rear port (the one closest to the firewall) is for the front brakes.