You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
I dropped one of these while doing my front brakes today and can't find the damn thing i searched all over the ground and couldn't find it Anyone have any ideas where I could buy one? It's the one that goes on the bolt that threads in.
__________________ 1998 Camaro Z/28145K A4 3.23s XS Stainless Headers and Jet-Hot ORY... Still slow. Blown Tranny
1998 Jeep Grand Cherokee 5.9 Limited Slate gray
1995 Z/28 A4 Stock stolen at $300 for a mistaken head gasket. Sold 2006 GMC 2500HD 83K LBZ Duramax 6Spd Alli Straight Pipe'd, EFILive. Totalled
hey man they are packaged in pairs at my local shop. They are crush washers for brake lines, that is what seals the banjo bolt to the caliper so fluid doesnt rush out. Go to and Local Parts Store and they will have them. take the banjo bolt with you so you get the right ones for sure. Also check to make sure it is not stuck to the hat of the bolt, or the caliper. that is a common mistake. they may be hard to see but 9/10 times they stick the opposite surfaces. IE: one on the bolt the other on the caliper.