prince xizor

iTrader: (2)

I was getting ready to install my single adjustable lower control arm and noticed I have a little tube of grease that came with the lca's. Where am I supposed to use this grease? Does it go around in between the red bushing and red lca? Or does it go in between the silver sleeve (where the bolt goes) and red bushing? Do I have to coat the rod ends with it?

UMI Performance

iTrader: (77)

The grease is to go on the outside of the poly bushings. Squeeze some on both sides and rub it in with your finger. This helps ease the control arm into place as well as protects the bushings.

Let me know if I can help anymore.

Thanks!
Ryan