K member removal tips - LS1TECH



Suspension & Brakes Springs | Shocks | Handling | Rotors

K member removal tips

Reply
 
Thread Tools Search this Thread
Old 04-02-2008, 01:11 PM   #1
TECH Enthusiast
Thread Starter
iTrader: (10)
 
Sweet71's Avatar
 
Join Date: Dec 2006
Location: Edmonton, CANADA
Posts: 515
Default K member removal tips

So im removing my k member and i was wondering if anybody had any tips or tricks on this?

Thanks for any help!!
Sweet71 is offline   Reply With Quote
Old 04-02-2008, 02:22 PM   #2
10 Second Club
iTrader: (8)
 
Join Date: Oct 2007
Location: Iowa
Posts: 1,239
Default

dont forget about the abs wires, they're easy to miss, do the two break lines on the abs unit,unbolt the steering shaft, the power stearing lines (if leaving the engine in) and the two motor mounts (with jack behind the front tires supporting engine) then the 4 strut bolts on each side, then the 6 bolts holding the K member in slowly lower it and your done.
355z28 is offline   Reply With Quote
Old 04-02-2008, 03:50 PM   #3
TECH Enthusiast
Thread Starter
iTrader: (10)
 
Sweet71's Avatar
 
Join Date: Dec 2006
Location: Edmonton, CANADA
Posts: 515
Default

Awesome, thanks for the help. Do you know if you have to bleed the abs system after or can you just bleed the breaks normally?? Thanks for the help!
Sweet71 is offline   Reply With Quote
Reply


Tags
kmember, ls1tech, removal

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 09:13 AM.