Hantzum

iTrader: (13)

I have a quick question. I just installed a BMR adjustable torqure arm and lower control arms on my 98 F-body. The pinion angle is set to a -2 but I need to make sure my Moser 12 bolt is centered correctly. How do I do that? If the pinion angle is set properly does that mean that the rear end is already centered accuratly? In other words how do I center my rear end?

35th SS

iTrader: (2)

jack the rear lower it in a jackstands sitting on the frame body leaving the rear unloaded and hanging off the ground.center your rear by adjusting your panhard rod.should be adjustable ones.if not you need adj.phb.

CW00BlackTA

iTrader: (31)

Yes, you need the adjustable panhard. You are centering from side to side. Meassure the gaps around your fender or from the subframes to the wheels.

35th SS

iTrader: (2)

just to add later on to adjust the rear from front to back you will need adj. lca.

Hantzum

iTrader: (13)

appreciate that. I have a BMR adjustable pan bar on order.