need help with knock sensors
08-25-2009, 10:18 AM
#3
TECH Enthusiast
iTrader: (5)
Join Date: Apr 2009
Location: Houston, TX
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
i know a guy that all he does is work on those trucks... ill ask him if this guy doesnt work out for you... he'll just ask for a little cash n thats about it
08-25-2009, 02:16 PM
#4
On The Tree
iTrader: (4)
Join Date: May 2007
Location: Katy, Texas
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
its not too hard i just did this on my parents truck (same exact truck as your actually) you just need to take off the intake and they will be sitting right there.
08-25-2009, 10:11 PM
#5
my number is 832-457-4660. i have never messed with the ls based style motors before, and since this is my dd i'd rather have someone help me out with it that knows what they are doing. i appreciate the responses, and just hope to get this done ASAP.
08-25-2009, 11:32 PM
#7
Teching In
iTrader: (1)
Join Date: Aug 2009
Location: Houston, Tx
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, i was hoping i could maybe get some help in this dept too. I just got my car back after having the t56 completely rebuilt. I put in a brand new clutch and flywheel, and when they installed the trans they put in a new poly trans mount. Just driving it today, it had the SES light on when i picked it up. I got the code checked, knock sensor 1 low input. I cleared it and drove the car for a good long while, pretty hard a few times, and it didnt come on for about an hour and a half of driving. Just before i came home it came back on under normal driving conditions. Am i right to think that this may be the new clutch chatter or the poly tranny mount sending vibration and creating a false knock in the sensor?
Trending Topics
08-26-2009, 02:30 PM
#9
TECH Apprentice
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, i was hoping i could maybe get some help in this dept too. I just got my car back after having the t56 completely rebuilt. I put in a brand new clutch and flywheel, and when they installed the trans they put in a new poly trans mount. Just driving it today, it had the SES light on when i picked it up. I got the code checked, knock sensor 1 low input. I cleared it and drove the car for a good long while, pretty hard a few times, and it didnt come on for about an hour and a half of driving. Just before i came home it came back on under normal driving conditions. Am i right to think that this may be the new clutch chatter or the poly tranny mount sending vibration and creating a false knock in the sensor?
PM sent, I just seen it today.
