b00ya

iTrader: (5)

I picked up a 98 formula roller a few months ago and finally got the motor in and ready to go just to find out the damn injector harnesses had been cut off so I either find the connectors and splice them in or buy a new harness. Only problem is I dont know if its a 98pcm or a 99+, how can I tell?

DopeFedZ

iTrader: (34)

Your pcm should have a white label on it. Post up a picture of it. You can also tell of the harness is a 98 or 99 buy looking at the amount of connectors running into the hole on the passenger side of the firewall. 2 connectors it's a 99+harness. 3 connectors it's a 98 harness.

ramairracer

iTrader: (13)

or the coolant temp sensor on 98 is three wire and all others 2 wire
or the oil press switch on 98 is diffrent i think it has more or less pins

b00ya

iTrader: (5)

well its a 98 pcm so do i need a 98 harness or will a 99+ work if i have the correct sensors

DopeFedZ

iTrader: (34)

98 pcm needs a 98 harness. The pin layout at the pcm connectors are completely different from 98 to 99+.

FlashWS6

iTrader: (18)

how would you know fucktard?













*waits for dopefed to post pic of him rewiring all that junk*

b00ya

iTrader: (5)

well damnit, looks like im gonna buy all new connectors and keep the 98 pcm and wiring.

DopeFedZ

iTrader: (34)

Check ebay or the classifieds here for a 98 harness. I got mine for about $125.