greenlanternws6

iTrader: (2)

I wanted to know how can I adjust my axle its about 1inch to the left ..The car was crashed before but no frame damage ...I have a after market pan handle bar but is not on car adjustable if anybody can help me out thanks ....

cambirdracing

iTrader: (4)

Need to get an adjustable bar.

00pooterSS

iTrader: (40)

Is it adjustable at all? If so then adjust it, if not get an adjustable one.

You said it isn't on car adjustable so I assume it is adjustable. you will have to take the bolt out at one end and adjust it an inch or so the way you need it to go then recheck it.

HTX

iTrader: (1)

No. Your *** does not look fat in those jeans. Can you please grab your purse so we can go to dinner now?

greenlanternws6

iTrader: (2)

Yeah I tryed to do that but doesn't move I think I'm just going to buy a on car adjustable bar to make it easy ..

HTX

iTrader: (1)

It really is the quickest and easiest fix. I also owned an fbody that had slid into a curb. The control arms were both bent. You may want to look at those as well. They are not expensive at all. Under $200 at UMI or BMR

brian_rs/ss

who cares if her *** is lop-sided, i still lover her

00pooterSS

iTrader: (40)

It should move if you adjusted it but either way, on car is the way to go.

But as stated check everything closely too to make sure nothing is bent. I hydroplaned and bent mine a while back, I straightened the panhard and readjusted it and everything was fine.