need help with ls1 f body engine harness grounds
#1
need help with ls1 f body engine harness grounds
hi, i need help with ls1 f body engine harness grounds. where do all the grounds go? i got he three on the back of the drivers head, but what about the driver side frame rail and all the braided straps?
thanks
thanks
Last edited by one fast zo6; 05-01-2012 at 12:53 PM.
#3
Teching In
Join Date: Dec 2010
Location: Spring/The Woodlands
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
oh man i just dealt with this problem when i did my swap..still dont know if i got em all...had to ground the computer with a new wire cause apparently i missed one somewhere...car wouldnt start without it. i believe there are the ones on the back of the head, and the driver side rail, and the main one from the battery...not sure if others exist.
#4
On The Tree
iTrader: (27)
Join Date: Dec 2008
Location: Middle of nowhere, Ny
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
-Trunk Hatch Release Bracket (2)
-Below Left Front Seat (Firebird Only)
-Center Rear of Roof (Camaro, Coupe only)
-Near left of Done Light (Camaro, Vert)
-Right Kick Panel
-Left Kick panel
-I/P Harness, Near Instrument Cluster
-Top Left of Radiator Support
-Top Right of Radiator Support
-Left Rear of Engine (3)
-Right Front of Engine
-L/F Shock Tower
-R/F Shock Tower
-L/F Frame Rail
-Right Side of Engine Block (BATT - )
-Lower Left Side of Engine
-Below Center console
-Below Left Front Seat (Firebird Only)
-Center Rear of Roof (Camaro, Coupe only)
-Near left of Done Light (Camaro, Vert)
-Right Kick Panel
-Left Kick panel
-I/P Harness, Near Instrument Cluster
-Top Left of Radiator Support
-Top Right of Radiator Support
-Left Rear of Engine (3)
-Right Front of Engine
-L/F Shock Tower
-R/F Shock Tower
-L/F Frame Rail
-Right Side of Engine Block (BATT - )
-Lower Left Side of Engine
-Below Center console
#6
ok thanks but where do the two breaded straps go? the one's one the drivers side front engine bay down by the Alternator? one lead is from the frame rail and one lead is from the engine harness. where do they get grounded? the engine, alternator or what? ps this car is running
#7
TECH Junkie
iTrader: (21)
Join Date: Oct 2003
Location: Houston , Tx
Posts: 3,419
Likes: 0
Received 0 Likes
on
0 Posts
ok thanks but where do the two breaded straps go? the one's one the drivers side front engine bay down by the Alternator? one lead is from the frame rail and one lead is from the engine harness. where do they get grounded? the engine, alternator or what? ps this car is running
Trending Topics
#12
TT-TECH Veteran
iTrader: (29)
The one on the driver side goes from the block, just behind the altenator (10mm) on the same bolt that holds the front O2 plug. And goes to the frame rail also a (10mm) and has the groung from the front headlight harness on the same bolt. I think this is the one you are refering to. I know where they all go lol! As a matter of fact I can put an F-body together with all the bolts in a box, I don't need a template. GL!