Anybody From HOUSTON know this car?
#1
Teching In
Thread Starter
Join Date: Jul 2006
Location: LouisiaNa-LS(U)
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Anybody From HOUSTON know this car?
I've just been wondering what the hell exactly did the White Corvette do to his exhaust in this vidd??!-Or if anyone knows the owner(anything!) , That things' a BEAST! It's on the [Best Video Ever! Houston] done in (obv.) Houston by Cammed03SVT, It's a badass vid, and some great cars, but I want to know what this cat was runnin' as far as like head, cats, pipes, etc.?! That shyts insane! It shows to be backing out of a garage like at around 30 sec. into the (6:00 min. long) video. Also-if anyone knows what would make my WS6 sound like this, lemme' know plse...appreciate it!- this is first post and i'll be here for a while..thnx for your help/replies...ANY ideas will be more than i got
It's an old vid. but badass!
It's an old vid. but badass!
Trending Topics
#11
Teching In
Thread Starter
Join Date: Jul 2006
Location: LouisiaNa-LS(U)
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/showthrea...=Houston+Video
There we go...Sorry guys-Still not too hot at this just yet, but the vette's like 30 sec.'s into vid, has "kwiknes" on the plates,..and is hard to freakn miss! thanks for all your replies/posts, I'm still in process of tryin to figure out how i'm gonna get my ws6 to sound that bad-
There we go...Sorry guys-Still not too hot at this just yet, but the vette's like 30 sec.'s into vid, has "kwiknes" on the plates,..and is hard to freakn miss! thanks for all your replies/posts, I'm still in process of tryin to figure out how i'm gonna get my ws6 to sound that bad-
#12
Teching In
Thread Starter
Join Date: Jul 2006
Location: LouisiaNa-LS(U)
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
The above is just a link to the post where i found it several months ago, sorry for all of this confusion, I just can't get my cpu to post it how i want (must be screwin' something up.. ) but that's about as close to it as I can get- It should just bring you to the page and you can d-load the vid from there, if you haven't seen it, you'll want too! once again, thanx for all the help (sorry again-for confusion as well) lol...(but no, ..really)
#13
TECH Resident
iTrader: (8)
Join Date: Nov 2001
Location: Stafford TX
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
At that time I beleive it was still Joe Knitter's car? (KWKNES) plates. That was just shortly after we had finished the 408 install. The exhaust system consisted of Kooks 1-7/8" headers, 3" x 3" x-pipe and a Corsa Tiger Shark cat back.
The only way you will get your F-body to sound like this is if you somehow dualed out your exhaust and adapted a C5 Corsa exhaust underneath the rear.
The only way you will get your F-body to sound like this is if you somehow dualed out your exhaust and adapted a C5 Corsa exhaust underneath the rear.
#14
Teching In
Thread Starter
Join Date: Jul 2006
Location: LouisiaNa-LS(U)
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
ooh-makes some since now (408) ...Thnx for post,--just a thought: what was the size engine that z06's (pre-C6's 427) had? like I know the c5's had 350's, and I just really never thought about it before now, guess i'm more of an f-body guy (although i'm driving a yllow/whte top a4 c5 today-go figure?) and is the white car actually a z06 and I didn't realize from vid?
#15
Teching In
Thread Starter
Join Date: Jul 2006
Location: LouisiaNa-LS(U)
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
so... basically question is shifted to not only what he's got, but if the corsa is actually possible for f-body? or, if there is something else out there that will give me the "i'm gonna kill your family" lope and idle...lol any ideas? (cam is going in too- but that's next topic after this one) bec. I'm prolly fixn to get my shyt together and start ordering stuff in like 3-4 weeks. Kooks are prolly bought first, but not sure what brand x-pipe to get (ideas on what sounds the meanest?), and the muffler is still a WTF if I can even do it...
#16
This is how it sounds open exhaust.
Click Video 1 and Video 2 in my sig.
These were the last video's of the car with the old setup.
It is a completely different setup now.
- Engine swap with all new misc parts.
- The wheels are swapped.
- Its lower
- The back panel is painted Sprial Gray
- Spec 5 clutch
- Cowl hood
- And It is now sporting a Twin Turbo Setup with a 9:5:1 comp ratio.
Click Video 1 and Video 2 in my sig.
These were the last video's of the car with the old setup.
It is a completely different setup now.
- Engine swap with all new misc parts.
- The wheels are swapped.
- Its lower
- The back panel is painted Sprial Gray
- Spec 5 clutch
- Cowl hood
- And It is now sporting a Twin Turbo Setup with a 9:5:1 comp ratio.
Last edited by G-Z06; 07-17-2006 at 11:09 PM.
#18
Teching In
Thread Starter
Join Date: Jul 2006
Location: LouisiaNa-LS(U)
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I've found a place in Texas(you guys have more than likely heard of it)- Texas-Speed.com, that offers an "Rumbler" kit-stating it comes with a(n) X-pipe, and it's not too bad on $$,so with Kooks headers, this xpipe, and I have no real ideas yet as far as cat's back, except for Corsa makes a kit for F-body's, and I haven't got a clue as if it will actually sound like the way I want it to in the end...Any ideas? I'm also going to buy a cam and the usual bolt-ons, but does anyone know about this corsa exh. kit? (I.E.- will the cats actually RedUCE the sound of it (the direction I don't want to go), Because I want to hear it-Just like this Z06---?