New pics of the '00 Camaro SS race car.
12-10-2007, 02:55 PM
#1
New pics of the '00 Camaro SS race car. Lemme know what ya think.
Oh and just in case:
Sunoco pin-on hood
Moroso DS-2 front runners
Mickey Thompson ET Drags 29.5x10.5x15 (soon to be Hoosier Radial Slicks)
Bogart Floyd RTs (rears have 5" backspacing)
Mini-tubbed (homemade)
Strange 12 bolt narrowed 3" per side
Oh and just in case:
Sunoco pin-on hood
Moroso DS-2 front runners
Mickey Thompson ET Drags 29.5x10.5x15 (soon to be Hoosier Radial Slicks)
Bogart Floyd RTs (rears have 5" backspacing)
Mini-tubbed (homemade)
Strange 12 bolt narrowed 3" per side
Trending Topics
12-10-2007, 04:23 PM
#16
TECH Regular
Join Date: Oct 2004
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
What motor combination is in this car? How fast has it been? Like everybody said, needs to be lower, but nice car none the less. Be carefull with those bogarts the hub's break alot..
Rob
Rob
12-10-2007, 05:08 PM
#19
Pavlock Performance, thanks, that's my other baby, aka daily driver and tow rig. 
Nine Ball, it's the driveway. Look at the gap in the rear between the fender and top of the tire. The only way I could lower the rear is to cut a coil, lowering springs, or coil overs in the rear. I don't believe coil overs for the rear is a direct bolt on, but I haven't looked into it. I already took out the isolators and replaced it with hose over the top coil.
racyphoenix, you too. I was wondering why your user name didn't ring a bell. Pretty new here. If the weather holds up next weekend, maybe you can actually see it make a clean pass.
davidv, I'm kinda
of the front end. The hood is unpainted and the facsia needs to be repainted. 
natez28, as soon as the weather holds up and get the kinks worked out of the car.
Rob Valden, 416 ci. 13.5:1 compression LS3/L92. Here's a few pics:
Nine Ball, it's the driveway. Look at the gap in the rear between the fender and top of the tire. The only way I could lower the rear is to cut a coil, lowering springs, or coil overs in the rear. I don't believe coil overs for the rear is a direct bolt on, but I haven't looked into it. I already took out the isolators and replaced it with hose over the top coil.
racyphoenix, you too. I was wondering why your user name didn't ring a bell. Pretty new here.
If the weather holds up next weekend, maybe you can actually see it make a clean pass. davidv, I'm kinda
of the front end. The hood is unpainted and the facsia needs to be repainted. natez28, as soon as the weather holds up and get the kinks worked out of the car.
Rob Valden, 416 ci. 13.5:1 compression LS3/L92. Here's a few pics:
