FS/TRADE: 1994 LT1 Z28 Camaro
#1
Teching In
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Texas
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
FS/TRADE: 1994 LT1 Z28 Camaro
This is a Teal Green 94 Z28. There is little work left to get it back on the road and it might be up and going by the time someone shows interest. The PCM had to be reflashed but now works. Also the windshield does have a crack in it. Just added T-Top shades as well to it.
Here's what it would come with:
-94 Complete chassis, body/glass, T-tops etc.
-Rebuilt LT1 Engine --- 0 Miles
-Rebuild 4L60-E --- 0 Miles
-Approx. 87000 miles on Odometer
-Rebuilt 3.23 geared 10-bolt and steel driveshaft
-Complete stock suspension, and Salad shooter wheels/tires, tires that have about 8K miles
-All Seats/carpeting and interior panels
-A4 Shifter
-V8 Radiator and Dual Fan assemblies, and some other engine accessories.
-94 4L60-E programmed PCM and original engine wiring harness (complete and uncut).
-T-top shades
-2400 B&M Stall
-Granatellli MAF Sensor
-New alternator and starter
-Bunch of new misc sensors/lines/hoses
It still has all the A/C and heating components and all the underhood related components are present.
Has current registration tag as well.
Car is located in Lubbock,Texas and asking $4,500
Pics are below. The interior has since been cleaned up and put back together. The only piece missing on the inside is the lid for the center console and the switches on the armrest like to pop out for some reason.
I now have a new TSP rumbler exhaust that just needs an SLP LT1 install kit and tips to put it on. Along with most of the interior parts needed to finish the inside up.
Here's what it would come with:
-94 Complete chassis, body/glass, T-tops etc.
-Rebuilt LT1 Engine --- 0 Miles
-Rebuild 4L60-E --- 0 Miles
-Approx. 87000 miles on Odometer
-Rebuilt 3.23 geared 10-bolt and steel driveshaft
-Complete stock suspension, and Salad shooter wheels/tires, tires that have about 8K miles
-All Seats/carpeting and interior panels
-A4 Shifter
-V8 Radiator and Dual Fan assemblies, and some other engine accessories.
-94 4L60-E programmed PCM and original engine wiring harness (complete and uncut).
-T-top shades
-2400 B&M Stall
-Granatellli MAF Sensor
-New alternator and starter
-Bunch of new misc sensors/lines/hoses
It still has all the A/C and heating components and all the underhood related components are present.
Has current registration tag as well.
Car is located in Lubbock,Texas and asking $4,500
Pics are below. The interior has since been cleaned up and put back together. The only piece missing on the inside is the lid for the center console and the switches on the armrest like to pop out for some reason.
I now have a new TSP rumbler exhaust that just needs an SLP LT1 install kit and tips to put it on. Along with most of the interior parts needed to finish the inside up.
Last edited by BushyTea; 01-24-2008 at 08:57 PM.
#3
Teching In
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Texas
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Here are some updated interior pics as requested by a few members in PM's. I didn't get a chance to vaccum it really good before the light was gone but did a quick vac job on it.
Last edited by BushyTea; 12-20-2007 at 05:49 PM.
#4
Teching In
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Texas
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Here are a few pics I took today. Engine is a bit dusty from sitting but just needs a good spray and it will clean right up.
Has an upgraded MAF sensor along with a new alternator and starter. Few other misc sensor are new as well.
Has an upgraded MAF sensor along with a new alternator and starter. Few other misc sensor are new as well.
#5
Teching In
Thread Starter
iTrader: (17)
Join Date: Jul 2007
Location: Texas
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Interior pieces are on their way so the interior should be complete once they arrive.
I have a new TSP rumbler exhaust kit that just needs the LT1 install kit to put it on along with tips.
I have a new TSP rumbler exhaust kit that just needs the LT1 install kit to put it on along with tips.