Gauging interest...
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: Alvin Tx
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Gauging interest...
I have been thinking about letting go of an old project of mine. It is a '92 Z28 Anniversary Edition (Not Heritage). It has a 350 TPI with a brand new 700r4/torque converter and a 10 bolt. Grey leather interior with grey carpet and headliner. The mods that I can think of off of the top of my head are:
1 5/8 ceramic coated Headman headers, 2 sets
3 inch exhaust with no cats and one chamber flowmaster
smaller pulley
Adj fuel press regulator
SLP plenum runners
ported factory upper intake
MSD 6 or 6A ignition box
Accel plug wires
BFG tires with DR's in the back
Newer style 3" aluminum driveshaft
Lakewood boxed style control arms
Lakewood panhard bar
Other stuff that I have forgotten about
AC and heater still worked last time I drove it.
Now the bad:
It needs a new paint job but only has MINOR rust on the doors where the trim used to be. I painted it myself but had issues with the clear coat. Lets just say that God didn't make me a car painter for a reason.
The driver's door drags as it isn't original. I have the original door still but the scissor lift for the window broke. The motor was still good when I took it off.
The dash is cracked as usual and the driver's seat has a spot where the leather has been poorly patched.
Right now the interior has been removed, I was going to turn it into a stripper but decided to build the '01 instead.
I need to take some new pix of it but have some from about 3 years ago which is when it was driven last. The car was started and ran weekly until about 2 months ago when the battery died.
I would like to get $2,500 for it. Older pix upon request
1 5/8 ceramic coated Headman headers, 2 sets
3 inch exhaust with no cats and one chamber flowmaster
smaller pulley
Adj fuel press regulator
SLP plenum runners
ported factory upper intake
MSD 6 or 6A ignition box
Accel plug wires
BFG tires with DR's in the back
Newer style 3" aluminum driveshaft
Lakewood boxed style control arms
Lakewood panhard bar
Other stuff that I have forgotten about
AC and heater still worked last time I drove it.
Now the bad:
It needs a new paint job but only has MINOR rust on the doors where the trim used to be. I painted it myself but had issues with the clear coat. Lets just say that God didn't make me a car painter for a reason.
The driver's door drags as it isn't original. I have the original door still but the scissor lift for the window broke. The motor was still good when I took it off.
The dash is cracked as usual and the driver's seat has a spot where the leather has been poorly patched.
Right now the interior has been removed, I was going to turn it into a stripper but decided to build the '01 instead.
I need to take some new pix of it but have some from about 3 years ago which is when it was driven last. The car was started and ran weekly until about 2 months ago when the battery died.
I would like to get $2,500 for it. Older pix upon request