MityVac Vacuum Pump
02-28-2005, 01:01 PM
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: May 2003
Location: San Marcos, TX
Posts: 1,670
Likes: 0
Received 0 Likes
on
0 Posts
MityVac Vacuum Pump I just got one, but I need it too bleed the power steering system. Where can I get the adapter that goes over the resovoir? I know its GM part J 43485, but where to get it and are the otehr brands? I looked where I got the pump and they didnt have any accessories for it. Thanks,
John
John
03-01-2005, 03:34 PM
#2
TECH Veteran
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
I own one of these too.
For changing the fluid in the reservoir, I just stick the end of the plastic vacume pump tube in the reservior and pump the handle to remove the old fliud. to really get all the old fluid out this way you must do this more than once and the intervals are preceded by driving around or starting the engine and moving the wheels full sweeps left and right.
This procedure is NOT called bleednig the power steering system which involves forcing fluid through the hydrolics system to remove oil fluid, air bubles and other contaminants. Consequently, if your system has air bubles, or contaminants changing the powere steering fluid in the reserviour will not help.
For changing the fluid in the reservoir, I just stick the end of the plastic vacume pump tube in the reservior and pump the handle to remove the old fliud. to really get all the old fluid out this way you must do this more than once and the intervals are preceded by driving around or starting the engine and moving the wheels full sweeps left and right.
This procedure is NOT called bleednig the power steering system which involves forcing fluid through the hydrolics system to remove oil fluid, air bubles and other contaminants. Consequently, if your system has air bubles, or contaminants changing the powere steering fluid in the reserviour will not help.
