Post pics of your garage / shop
08-02-2010, 11:55 PM
#546
TECH Veteran
iTrader: (33)
Join Date: Nov 2001
Location: Port Richey
Posts: 4,266
Likes: 0
Received 0 Likes
on
0 Posts
Finally have something worthy of posting here.Been in this house for about 4 months. Very unique with a large 2 car garage in the house...and then a seperate 3.5 car garage/workshop with a covered walkway from the house to garage/workshop. .75 acres with lots of trees and 2 small lakes. I just installed the MaxJax llow ceiling lift this saturday. Works great.
Walkway from house to seperate garage from the pool area
veiw of the garage and walkway to the house from the front
2nd garage has a full bathroom complete with shower and seperate hotwater. It also has its own 150 amp panel (house has a 150 amp panel too)
Veiw of the front of the house. Main garage and house to the left..you can see an SUV in the garage. Second detached garage to the right with the lift inside.
Walkway from house to seperate garage from the pool area
veiw of the garage and walkway to the house from the front
2nd garage has a full bathroom complete with shower and seperate hotwater. It also has its own 150 amp panel (house has a 150 amp panel too)
Veiw of the front of the house. Main garage and house to the left..you can see an SUV in the garage. Second detached garage to the right with the lift inside.
Last edited by 383LQ4SS; 08-03-2010 at 12:15 AM.
08-03-2010, 08:07 AM
#547
We are getting our shop in order. My dad and I just went in together on a bunch of equipment. Now its just a matter of getting it all moved around.
2 of the 5 tables. The tool boxes between the mill and lathe are full of all the tooling and dies for them.
the big mig, stick and plasma cutter
the tig and cool cart.
the lathe. It is around 40"
the mill
the band saw
the horizontal saw and 30" sander
4' x 10' layout table. 1/2" thick. and small fork lift.
more tables
2 of the 5 tables. The tool boxes between the mill and lathe are full of all the tooling and dies for them.
the big mig, stick and plasma cutter
the tig and cool cart.
the lathe. It is around 40"
the mill
the band saw
the horizontal saw and 30" sander
4' x 10' layout table. 1/2" thick. and small fork lift.
more tables
Nicely equipped shop here.
08-09-2010, 01:44 PM
#549
TECH Enthusiast
Join Date: Oct 2007
Location: NC
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
08-27-2010, 09:27 AM
#555
I took a couple quick shots of my shop this morning. I was taking some pics of my car in it's scattered condition and figured I would snap a couple of the building while I was at it. The shop is 30'x60' with 12' walls and the lean-to is 30'x20'. All the plywood is for the walls, cabinets, and shelves when I find time to work on it. Right now I'm focusing all my spare time on the car.... obviously 
.
.
08-30-2010, 04:44 PM
#556
Finally have something worthy of posting here.Been in this house for about 4 months. Very unique with a large 2 car garage in the house...and then a seperate 3.5 car garage/workshop with a covered walkway from the house to garage/workshop. .75 acres with lots of trees and 2 small lakes. I just installed the MaxJax llow ceiling lift this saturday. Works great.
