Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

ls1 swap will not start

Thread Tools
 
Search this Thread
 
Old 05-29-2016, 09:20 AM
  #1  
Registered User
Thread Starter
 
78skylark's Avatar
 
Join Date: May 2016
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default ls1 swap will not start

Just put an ls1 from a 98-02 Camaro in my 78 skylark engine has ls6 heads and a bigger cam bought off ebay a few years ago and ecm was supposedly set up for a swap in an older car, also has a new wiring harness from painless. The engine fired the first couple times but died as quick as it fired pulled a plug from each side and they had spark while cranking also were a little wet with fuel, got 60 psi fuel pressure while cranking, also maybe sounds like its backfiring through the intake, not sure if its sensors or what just looking for suggestions.



Quick Reply: ls1 swap will not start



All times are GMT -5. The time now is 03:45 PM.