FS GMC Syclone
#1
Teching In
Thread Starter
Join Date: Jan 2012
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
FS GMC Syclone
Year: 1991
Make: GMC
Model: Syclone
Price: $7000
Mileage: 77000
Private or Dealer Listing: Private Listing
Location (State): NJ
Color: Black
Transmission: Automatic
Drivetrain: 4WD & AWD
LS Engine?: Car has other engine
Reason for sale is simply because I have no time for it and lost interest years ago. I've put 2k if that on the truck since purchasing it back in 01. I just sold my typhoon as well so i'd like to get this into the hands of someone that will use it for it's intended purpose and not just sit in a driveway like I have
Truck has an upgraded turbo, fmic, alky injection, chip and runs strong but it's priced below kbb for a reason. The paint although it looks great in teh pics it is not. The factory paint does come up nice if you wax it but it's flaking so it needs a repaint. Truck does have minor rust that's typical to s series trucks is completely repairable. The heater core went when I first got the truck never swapped it out because I never used it so that's by passed right now but a $36 part and both windows are very slow going up so they'll need motors sooner then later. Also now all four tires have cracking from sitting.
Here's a quick list of whats done to the truck off the top of my head
RPM Stage1 Turbo with polished compressor cover
RPM adjustable wastegate actuator and adjustable bracket
RPM braided return line
TurboTweak adjustable chip with latest update
3 Bar MAP
Stock downpipe with exhaust cutout and wideband bung
Front mount intercooler
NGK UR5 plugs
Taylor Spiral Pro plug wires
Napa Cap
Optima Red Top relocated to bed
AFPR
Adjustable Alt Bracket
March water pump pulley
Edelbrock alumminum waterpump
180 thermostat
Volvo 3k cfm electric fan
CS144 140amp alt
Alcohol progressive injection
Silicone vac lines
boost, fuel pressure and wideband gauges
Goodmark cowl hood
Lund backdraft spoiler
SS zr1 wheels
Typhoon mirrors
Belltech drop springs
Battlebar traction bars
Gilbert hd propshaft
Walbro 255 pump
KYB shocks
Upgraded steering shaft
http://s571.photobucket.com/albums/s...turbo/Syclone/
Could possibly include my small thinkpad laptop with Datamaster datalogging software not sure yet.
Any questions let me know
Last edited by yujelly; 03-02-2013 at 07:15 PM.
#4
Teching In
Thread Starter
Join Date: Jan 2012
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Teching In
Thread Starter
Join Date: Jan 2012
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
1485 is the truck number
I would say 7600 probably. If I end up tossing new tires on it then the price would increase some
A few people asked for more pictures and there should be what you need here
http://s571.photobucket.com/albums/s...turbo/Syclone/
IF not let me know
I would say 7600 probably. If I end up tossing new tires on it then the price would increase some
A few people asked for more pictures and there should be what you need here
http://s571.photobucket.com/albums/s...turbo/Syclone/
IF not let me know
Last edited by yujelly; 08-15-2012 at 10:59 PM.
#11
Teching In
Thread Starter
Join Date: Jan 2012
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
#14
Teching In
Thread Starter
Join Date: Jan 2012
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
It's not a huge large turbo but it's the largest I could go with the stock stall converter and the drive ability with the stock stall is good. Stock turbo trucks easily hit low 12's so the truck dialed in with the meth spraying should be a quick truck.
I had it to the track when I first purchased it and all it had was an adjustable fuel pressure regulator and ran three passes. First pass was a 13.09@98mph launching with 7 psi maxing at 16psi. Next two passes were complete waste and in the mid 14's because the abs unit failed so with any throttle the truck would completely go through the brakes like you weren't using them so no boost and no throttle off the line so I deleted the abs and after reading about how it's a first gen design and sort sucked Im glad I did.
I had it to the track when I first purchased it and all it had was an adjustable fuel pressure regulator and ran three passes. First pass was a 13.09@98mph launching with 7 psi maxing at 16psi. Next two passes were complete waste and in the mid 14's because the abs unit failed so with any throttle the truck would completely go through the brakes like you weren't using them so no boost and no throttle off the line so I deleted the abs and after reading about how it's a first gen design and sort sucked Im glad I did.
#16
Teching In
Thread Starter
Join Date: Jan 2012
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
When you setup a time/day to view the truck with people they seem to vanish.. six different people just vanished so that and me not really investing much time into trying to sell leads to the truck sitting in my drive way still
#17
hey man just a thought but do u have a nice full size truck u could throw in with the cyclone i have a nice 08 gmc 2500hd id like to trade for the toy truck and a full size lmk if so 865-363-3758
#18
Teching In
Thread Starter
Join Date: Jan 2012
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
#20
Teching In
Thread Starter
Join Date: Jan 2012
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts