2002 Firebird WS6 Collectors Edition
03-26-2013, 04:28 PM
#1
Teching In
Thread Starter
Join Date: Mar 2006
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2002 Firebird WS6 Collectors Edition Year: 2002
Make: Pontiac
Model: Firebird
Price: $1
Mileage: 5046
Private or Dealer Listing: Private Listing
Location (State): CA
Color: Yellow
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
5,046 original miles!!!
less than 1000 miles on ALL upgrades
1.427 World products WARHAWK block 9.240" deck height
Priority main oiling, billet main caps, 6 bolt holes per cylinder
Callies 4340 4.0" stroke crankshaft
Manley 6.125" Pro Lite Billet rods w/APR 2000 7/16 bolts
Wiseco custom forged 4.125 pistons w/lateral gas ports
NPR stainless steal chrome rings
Federal Mogal 152M mains
Clevite CB 663 H rods
Dura Bond cam bearings
2.ET Performance 265cc CNC ported cylinder heads
Ferrea 2.215" int
1.600" exh. vales
Manley Nex Tek dual springs good for .650" lift
Titanium retainers, machined locators and locks
3.Cam Motion custom LS1 camshaft
4.Roll master double roller timing set w/torington bearing & nitrided gears
5.Crane Hyd Roller Lifters LS1 #10530-16
6.Shaver tie bar lifter
7.LS1 push Rods Comp cams #7955-16
8.Crower shaft mounted rockers for LS1 w/ET cylinder heads
9.Cometic MLS head gaskets
10.APR 1/2 LS1 studs
11.LS6 Oil Pump ported & shimmed
12.90mm throttle body
13.Extreme Duty 9" ford housing for F-body rear end
14.Rear Lower control arms with Poly bushing F-body long tube headrs
15.9" pro alum LW 31-35 SPL spool
16.LS,LS6 Billet Manifold
17.High flow rail LSX
18.28-35 Spline Axle Package with 5/8 studs
19.7/8" x 2" x 3 1/2" Race headers
20.Y pipe 3" Inlets to 4" outlet
21.Custom AFCO shocks
22.G-FORCE transmission T-56, hardened input shaft, set up for 900hp street strip application
23.Lakewood bell housing SFI approved
24.Dual disc clutch
25.Lightweight flywheel
26.Hardened 1350 joint
Full race exhaust build by Bunker Race Cars
PUSH OFF system
6 POINT roll cage
Slicks and skinnes
Full race suspension
The components were put together by HiTech Motorsports in Ramsey, MN
The final assembly was done AED(advanced engine development) in Cameron Park, CA
The car is in EXCELLENT condition!!!!
570RWHP
550 Torque
Sam
510-395-1007
Over $110,000 invested with price of car!!!
$32,000 OBO, I am negotiable on the price depending on situation
There is a lot of things Im forgetting and I will update as I remember
NO JOY RIDES, MUST BRING LICENSE TO LOOK AT CAR!!! I WILL TAKE QUALIFIED BUYERS FOR TEST DRIVE MYSELF.
