FS: 730rwhp ProCharged/Cammed G8 GT - $30k OBO
05-19-2013, 02:36 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
FS: 730rwhp ProCharged/Cammed G8 GT - $30k OBO Year: 2015
Make: Pontiac
Model: G8
Price: $30000
Mileage: 52092
Private or Dealer Listing: Private Listing
Location (State): NV
Color: Red
Transmission: Automatic
Drivetrain: Rear Wheel Drive
List of mods
Motor
Procharger F-1D – 4.5” 8 rib pulley – 13psi (enough room for a 5" pulley which should bring the boost down to 10-11psi)
Treadstone TR1235 intercooler 12.5" X 22" X 3.5" Overall length 30", 3" inlet/outlet, 1142 CFM flow rate
GM Performance CNC LS3 heads
ARP head bolts
Stock L76 short block
LS3 head gaskets
LS2 chain
LS2 Damper
GM LS7 lifters
Yella Terra 1.7 Rocker arms
LS3 valley cover
PAC 1218 beehive springs. Have Lunati double valve springs that need to be installed.
New Era Performance Cam 228/240 .598/.590 LSA 114
LS7 cam gear
Manley chromoly pushrods
RX Catch can
Kooks 1 7/8 long tubes and connection pipe
Corsa catback w/ polished mufflers and tips
Fuel
FIC 1000cc injectors
FAST fuel rails
FAST fuel pressure regulator
Aeromotive A1000 fuel pump
EFI Live E85 tune
Transmission
STOCK 6L80E
Yank SS2800
EARLS Trans cooler
Camaro trans pan/filter
Suspension
Pedders Xa Coilovers
BMR trailing arm
Brakes
Gen 2 6 piston CTS-V brakes (F)
Hawk HPS Pads
Stock brakes (R) stock pads
Interior
OEM red and black leather
Exterior
GXP Front Bumper
GXP Diffuser
Forgestar Piano Black F10 with step lip
20x8.5 F/ 20x10.5 R
Painted Black roof w/ red,gray,dark gray vinyl Australian flag
Maverick Man carbon fiber hood (cracked on the front from shutting it)
Maverick Man carbon fiber kidney grills
Maverick Man carbon fiber lower grill
Maverick Man carbon fiber spoiler
Third_Shift Studio black concept darts
Third_Shift Studio black G8 and 6.0 badges
GM E85 badge
HID 8k kit
Clear switch back turn signals
Clear bumper and side lights w/ 6k lights
This 690rwhp DYNO pull was only to 6,000 rpm
This was the final DYNO run. Made 730rwhp which is only 6 horsepower less than what I made on 91 octane with a 4" pulley.
Last edited by incon3037r; 05-20-2013 at 09:55 PM.
05-21-2013, 11:34 PM
#4
11 Second Club
iTrader: (6)
Join Date: Jun 2004
Location: Ann Arbor, MI
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Im putting my G8 up for sale, because I want to start a family and by a house here in Las Vegas or in Vietnam; haven't decided which location yet. I'm the only owner of this car and I have never raced it so I don't have any lap times or 1/4 mile times. Since installing the Procharger I have not taken it above 5,000 rpm because there is no traction above that with my current tire setup. The Procharger has approximately 2,500 miles since it was installed including dyno tuning.
List of mods
Motor
Procharger F-1D – 4.5” 8 rib pulley – 13psi (enough room for a 5" pulley which should bring the boost down to 10-11psi)
Treadstone TR1235 intercooler 12.5" X 22" X 3.5" Overall length 30", 3" inlet/outlet, 1142 CFM flow rate
GM Performance CNC LS3 heads
ARP head bolts
Stock L76 short block
LS3 head gaskets
LS2 chain
LS2 Damper
GM LS7 lifters
Yella Terra 1.7 Rocker arms
LS3 valley cover
PAC 1218 beehive springs. Have Lunati double valve springs that need to be installed.
New Era Performance Cam 228/240 .598/.590 LSA 114
LS7 cam gear
Manley chromoly pushrods
RX Catch can
Kooks 1 7/8 long tubes and connection pipe
Corsa catback w/ polished mufflers and tips
Fuel
FIC 1000cc injectors
FAST fuel rails
FAST fuel pressure regulator
Aeromotive A1000 fuel pump
EFI Live E85 tune
Transmission
STOCK 6L80E
Yank SS2800
EARLS Trans cooler
Camaro trans pan/filter
Suspension
Pedders Xa Coilovers
BMR trailing arm
Brakes
Gen 2 6 piston CTS-V brakes (F)
Hawk HPS Pads
Stock brakes (R) stock pads
Interior
OEM red and black leather
Exterior
GXP Front Bumper
GXP Diffuser
Forgestar Piano Black F10 with step lip
20x8.5 F/ 20x10.5 R
Painted Black roof w/ red,gray,dark gray vinyl Australian flag
Maverick Man carbon fiber hood (cracked on the front from shutting it)
Maverick Man carbon fiber kidney grills
Maverick Man carbon fiber lower grill
Maverick Man carbon fiber spoiler
Third_Shift Studio black concept darts
Third_Shift Studio black G8 and 6.0 badges
GM E85 badge
HID 8k kit
Clear switch back turn signals
Clear bumper and side lights w/ 6k lights
This 690rwhp DYNO pull was only to 6,000 rpm
http://www.youtube.com/watch?v=iFC6pbGO-A4&feature=plcp
This was the final DYNO run. Made 730rwhp which is only 6 horsepower less than what I made on 91 octane with a 4" pulley.
http://www.youtube.com/watch?v=8NbH7kiGVRY&feature=plcp
List of mods
Motor
Procharger F-1D – 4.5” 8 rib pulley – 13psi (enough room for a 5" pulley which should bring the boost down to 10-11psi)
Treadstone TR1235 intercooler 12.5" X 22" X 3.5" Overall length 30", 3" inlet/outlet, 1142 CFM flow rate
GM Performance CNC LS3 heads
ARP head bolts
Stock L76 short block
LS3 head gaskets
LS2 chain
LS2 Damper
GM LS7 lifters
Yella Terra 1.7 Rocker arms
LS3 valley cover
PAC 1218 beehive springs. Have Lunati double valve springs that need to be installed.
New Era Performance Cam 228/240 .598/.590 LSA 114
LS7 cam gear
Manley chromoly pushrods
RX Catch can
Kooks 1 7/8 long tubes and connection pipe
Corsa catback w/ polished mufflers and tips
Fuel
FIC 1000cc injectors
FAST fuel rails
FAST fuel pressure regulator
Aeromotive A1000 fuel pump
EFI Live E85 tune
Transmission
STOCK 6L80E
Yank SS2800
EARLS Trans cooler
Camaro trans pan/filter
Suspension
Pedders Xa Coilovers
BMR trailing arm
Brakes
Gen 2 6 piston CTS-V brakes (F)
Hawk HPS Pads
Stock brakes (R) stock pads
Interior
OEM red and black leather
Exterior
GXP Front Bumper
GXP Diffuser
Forgestar Piano Black F10 with step lip
20x8.5 F/ 20x10.5 R
Painted Black roof w/ red,gray,dark gray vinyl Australian flag
Maverick Man carbon fiber hood (cracked on the front from shutting it)
Maverick Man carbon fiber kidney grills
Maverick Man carbon fiber lower grill
Maverick Man carbon fiber spoiler
Third_Shift Studio black concept darts
Third_Shift Studio black G8 and 6.0 badges
GM E85 badge
HID 8k kit
Clear switch back turn signals
Clear bumper and side lights w/ 6k lights
This 690rwhp DYNO pull was only to 6,000 rpm
http://www.youtube.com/watch?v=iFC6pbGO-A4&feature=plcp
This was the final DYNO run. Made 730rwhp which is only 6 horsepower less than what I made on 91 octane with a 4" pulley.
http://www.youtube.com/watch?v=8NbH7kiGVRY&feature=plcp
