99 wide body FRC/F1a procharged 807hp/710tq
07-10-2013, 07:43 PM
#1
Teching In
Thread Starter
Join Date: Feb 2011
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
99 wide body FRC/F1a procharged 807hp/710tq Year: 1999
Make: Chevrolet
Model: Corvette
Price: $30
Mileage: 1
Private or Dealer Listing: Private Listing
Location (State): FL
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
car is on a 93 tune..low boost 10psi and made 807hp/710tq....I do have the pulley to make roughly 25-26psi..
Engine:
414ci LS2 9:1CR
Callies Crank
Callies Rods
wiseco pistons/rings
Lingenfelter 6.0 Heads
CB02 Blower cam
Comp 921 springs
ARP head studs
Hardened Pushrods
Induction:
Procharger F1-A
car is low boost at 10psi on 93 tune/made 807HP/710TQ
Cartek Flip Drive (Dual belt setup, can drive without blower belt)
8 Rib crank and blower pulleys as well (Zero belt slip)
Tial 50mm BOV
Fuel:
RSI Fuel system
Twin in-tank Walboro 255lph pumps
Two -6 Feed lines
Return is a single -6
Aeromotive Fuel rails
Aeromotive Regulator
83# injectors
Exterior:
MCM Carbon Fiber Hood
L5 Rear fenders
Specter Works rear facia
iForged Aero Rims 18x9.5 & 19x13 ($6000 in just rims)
BFG 275/35/18 up front, Nitto NT05R 345/30/19 rear
Exhaust:
LG Pro Long Tube Headers
LG catless x-pipe
Borla Stinger quad tip exhaust
Drive train
RPM Level V Transmission and then some
Gforce overdirve gearset .83/.70
B&M Ripper Shifter
LG Solid torque tube bushings
Hardened output shafts
Stock 3.42 gearing
Monster stage 5 clutch
Diff-all C6 z06 internals
Misc:
AEM Wide band gauge in pillar pod
Boost Gauge in pillar pod
Line Lock in car just not hooked up
Slotted & Dimpled Rotors
HID headlights (lows) Stock Highs
Car Skinz gray stitched center console
Car Skinz gray stitched shift boot
Black chrome engine cap set
Lingenfelter battery relocation to trunk kit
Z51 Suspension
Covercraft Dustop Car Cover
2 Sparco 6 Point Harnesses/stock seat belts still in car
