2002 camaro SS roller
04-14-2014, 11:56 PM
#1
Teching In
Thread Starter
Join Date: Dec 2009
Location: Iuka MS
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
2002 camaro SS roller Year: 2002
Make: Chevrolet
Model: Camaro
Price: $11000
Mileage: 55000
Private or Dealer Listing: Private Listing
Location (State): MS
Color: Orange
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
It runs 6.50s at around 102 and weights about 3500 with me in it. I don't know the horsepower its never been on a dyno, it was street tuned on e85. It has a clean title but has a previous salvage title because of theft. The bad is the motor is out because of thrust bearing failure, it happened last summer and I haven't had the time to fix it and I've just lost interested in it. I will try to get pics up tomorrow. Any body interested in it can text me. 662 660 6548 Jeremy mod list: seasoned lq4 block, callies compstar crank and rods, wiseco pistons -2 cc, arp main studs, comp cam 248 254 621 621 114, adjustable timing set, ported trick flow 220 heads with 59.5 cc chambers which makes the compression about 12.8, yella terra rockers, trick flow pushrods, ls7 lifters, fast 102, ptm 102 throttle body. The trans is a th400 with reverse manual valve body, trans break, neal chance converter. The rear end is a moser 12 bolt with 35 spline axles, full spool and no abs, wolfe anti roll bar, bmr adjustable lower control arms, adjustable pan hard bar, umi tunnel mount torque arm, boxed sub frame connectors can't remember the name, 3 way adjustable shocks, bmr cross member
i know theres a lot more stuff on it thats all i can't think of the top of my head
and questions just text or pm me thanks.
Last edited by bossz28-1; 05-19-2014 at 11:12 PM. Reason: price drop
Trending Topics
04-30-2014, 08:54 PM
#9
this is a decent deal even with the title and motor issue. it should easily part out for $13k+ (even if only valuing the stock roller with a 10 bolt for $2000, but if it's as clean as it looks with 55k miles, it's likely worth more depending on the interior). I say keep it, rebuild the mtor and ask $15k or part it out and get your money out of it! If nothing else though, GLWS! 
05-04-2014, 04:55 PM
#10
Teching In
Thread Starter
Join Date: Dec 2009
Location: Iuka MS
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
this is a decent deal even with the title and motor issue. it should easily part out for $13k+ (even if only valuing the stock roller with a 10 bolt for $2000, but if it's as clean as it looks with 55k miles, it's likely worth more depending on the interior). I say keep it, rebuild the mtor and ask $15k or part it out and get your money out of it! If nothing else though, GLWS!
