1994 Camaro Z28/T-Top/6spd 11-sec car- Fs/Ft
01-21-2016, 11:13 AM
#1
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
1994 Camaro Z28/T-Top/6spd 11-sec car- Fs/Ft Year: 1994
Make: Chevrolet
Model: Camaro
Price: $8000
Mileage: 155
Private or Dealer Listing: Private Listing
Location (State): NY
Color: Blue
Transmission: Manual
Drivetrain: Rear Wheel Drive
Car dynoed tuned at 373hp/389Rwhp--(have dyno sheet) Car ran a best of 12.4x w/ 1.74 60' on motor and ran 11.6 w/ 1.69 60' on a 100 shot (have slips) both shifting at around 59-6000 due to breaking up opti. Now have LTCC Coil on plug setup-Plenty more left in it with an aggressive tune and running it up in the r's
Engine- 11:5:1 Comp.
- Decked/Balanced Rotating Assy/Line Honed/New Freeze Out Plugs/Polished and turned stock crank -all done with torque plate
-4bolt main block .30 over/ mahle forged pistons/eagle h-beam 6" rods/ file fit rings/all arp harware/ high volume oil pump
-Heads done by Golen Engines- mild port work with bigger valve 2.0 1.60/3 angle valve job /54cc Heads/w/ comp 987 double springs
-CC503 Cam 537/544 lift
-Comp 7/16" Ultra Pro Mag 1.6rr -Trickflow Guide Plates
-ARP 7/16" screw in studs
-Canton Fabbed Valve Covers powder coated black
-Double Roller Timing Chain
-Electric Water Pump
-Moroso CAI
-Trickflow Ceramic Intake Arm
-Borla stainless CME(center mount exhaust) with painted valance
-Pacesetter offroad longtube headers/y-pipe
-BBK twin 58mm tb
-Ported Intake also opened up to 58mm
-30# Redtop Svo injectors
-zex nozzle wet system 75,100,125 jets(58mm nos plate waiting to be installed)
Ignition
-LTCC LS1 Coil on plug conversion kit--Has built in 2 step/timing retard as well as rev limiter setup. timing retard at the flip of a switch for nitrous-(all hooked up and working)
Suspension-
-Moser 12bolt with 4:11 gears
-Viking Double adjustable front struts w/ coilovers w/ 300# race springs and 18 pos adjustable comp & rebound
-Viking Double adjustable rear shocks w 18 pos comp and rebound sitting on stock springs
-BMR adjustable torque arm
-BMR torque arm relocation bracket
-BMR panhard bar
-BMR rlca's
-BMR tubular k-member(powdercoated hugger orange)
-BMR adjustable adj lower control arms
-SPOHN fr. upper control arms
-Lakewood Driveshaft loop
-UMI 3 point Sfc's
-Brand New Fr Pads/Rotors Hawk Pads/Slotted and drilled rotors
-Brand New R Pads/Rotors Hawk Pads/Slotted and drilled rotors
-Fr Stainless brake lines
-New Rear Line W/ Adj Pro Valve
Transmission-
-6spd with spec stage 2+ clutch & pp
-stock lightened flywheel
Misc-
-Pioneer Deck W Aux output
-T-top Car
-SLP manual fan switch hi/low/stock operation function
-Autometer Level 2 Shift Light
-Racetronix 255lph Fuel Pump w/ hotwire kit
-200 amp alternator
-SLP Custom Fit Cover
-Harwood 2.5" cowl hood
-race star wheels with hoosier QTP 28x11.5x15 on rear and hoosier 26x4.5x15 on front
-optima blue top battery relocated to trunk with kill switch
does not have a/c
845-325-8231 if interested- 8500 OBO
Call or text open to offes this is my starting point- Have tons of pictures I can text.
shot in the dark will trade for a c5 or a stock ls trans am or ss camaro . 6speed cars only.
Last edited by Lt1Son; 06-22-2016 at 12:32 PM.
02-02-2016, 01:44 PM
#4
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
8000 obo for the car- with the follow items not completed- the cme and valance were sold currently no catback on car-headliner is not redone yet(out of car)
Car has nice formula black leather fronts and rears no rips in it--
Car has nice formula black leather fronts and rears no rips in it--
Last edited by Lt1Son; 06-22-2016 at 12:30 PM.
