880whp LSx/T56 Rx7 for under $13,000. Cheapest dollar per HP on the market
11-28-2016, 09:28 AM
#1
TECH Fanatic
Thread Starter
880whp LSx/T56 Rx7 for under $13,000. Cheapest dollar per HP on the market Year: 2018
Make: Mazda
Model: RX-7
Price: $11000
Mileage: 1
Private or Dealer Listing: Private Listing
Location (State): OH
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
Makes 880whp @ 24psi
Best ET 10.0 "on the brakes"
Best trap 151mph. 21psi.
Located- Avon Ohio
I have owned the car going on 4 years and it has always run well, and never left be stranded. I will do my best to list all the modifications. Please ask specific questions if you have them.
Chassis. 1990 FC RX-7 Turbo II. Clean title
REAL RE Amemiya FC2000 front end conversion (still have stock Tii bumper and flip lights)
** Fresh paint in 2015 **
Ploy bushings throughout. derlin DSS.
Stance full coil overs
Full TII brakes, Hawk pads, all braded lines
REAL RE Amemiya FC2000 front end conversion (still have stock Tii bumper and flip lights)
No HVAC
real MoMo Stearing Wheel
20% tint
Corbu seats in good condition
Mix of VDO and auto meter gauges
No PS-real manual rack
Rear cargo hatch cover!!
Nice S5 tails
Drivetrain
Current engine. Iron 5.3 SBE. 853 heads
CamMotion Global warmer Cam. Comp dual springs and hard pushrods
SM head studs and MLS gaskets
Melling HV oil pump
New timing set
New OE lifters
Ls1 intake
Griffin Radiator
SPA Electric fan with thermostatic control
Ls1 T56. Shifts great all gears up to 7800 rpm
pro 5.0 shifter
Quater Master Super twin. 8.5 w/ race discs
QM billet TB
13 lbs SFI flywheel
GSS Driveshaft
TII Rear. Reshimmed/ Redline Shockproof
Induction/Fuel
Garrett GT4780 Ball Bearing
Flipp'd truck manifolds- 2.25 hot pipes
twin 38mm gates. fully braced
Full 3 inch Charge piping
custom 4inch exhaust w/ electric cut out
2 stage boost controler
31x13x5 FMIC w/ R-34 "airlfow" endtanks
50mm bov
80 lbs Siemens Injectors
450+340lps pumps in tank (parallel)
rising rate adjustable AFPR
Pump gas or Cam 2 Tunes to 25psi by Erik@Backstreet performance.
Extras that can come with the car
Clean BBS Mesh wheels
2 good T-56 transmissions (one LT1 and one CTS-V)
Known Good Tii Rear end
Known Good NA LSD Rear W axles
Aluminum D Shaft for NA rear
Several spare NA axles
2 Sets on nice door panels
Nice TII Hood
NA Hood
Tii S5 front bumper
Chromolly 6 point cage
8.8 rear end
Working Iron 6.0 short block
Spare heads
Current Wheels- RX7 BBS Vert wheels with with Mickey Thompson 275/60/15 ET pros and new front tires.
Also-Drag Pack 15 inch weld Pro stars, new front skinnies and good Hosier 26x9 slicks
I doubt there is another car anywhere in the country this clean, making this much power for under 12k. I also have pics on just about everything, so if you need somthing specdific or proof of a part, just ask.
The car can be sold a few different ways or configurations.
As Is, no extras. $12,900. Stroke check, go Busa hunting.
With all Extras $15,000. Big ticket Items are 6.0, 2 T-56 Transmissions, Drag Pack Multiple Rear ends and axles.....Chrome Moly cage
I would MUCH rather sell everything. If I dont have the car, having the parts would, well just encourage me to build another one
Feel Free to PM me, or email to jp@nlcloans.com
Current turbo on right
There are a lot of Videos of the car. Here are just a few.
When it was Twin Turbo Last year. Less HP and TRQ than it has now, and was fuel sloshing in 1/2nd (hence the bucking)
https://www.youtube.com/watch?v=KNtP...ature=youtu.be
https://www.youtube.com/watch?v=KjAW...ature=youtu.be
on pump gas boost
https://www.youtube.com/watch?v=OjOi...ature=youtu.be
https://www.youtube.com/watch?v=F0Uf...ature=youtu.be
** UPDATE**
Sorry I have been slow to respond to some. Kids were sick over the holiday and I was out of town for work. I have a TON of PMs and emails and if I missed you I am sorry. Just read this!
Ok, here is the update on the Rx7 sale.
The buyer I had the car on hold for got stuck in New York for 2 days when his connecting flight got canceled. He was unable to see the car, but has dibs for 24 hours since he made the attempt to come out.
The car 2 weeks ago developed a tick. I was about ½ mile home when this happened. It sounds like a lifter, could be a rod. Either way the heads should come off to have a look around at minimum. That being said- it still starts, runs and drives fine and has oil pressure. The previous buyer knows this, and intends to buy it as-is
Due to this issue I have lowered my Ask to $11,000 with Black Talon Tsi wheels, or $11,700 with the Weld drag pac and ET pros. That’s right, Tuned 900HP with a T56 and bad *** twin disc for $11k! I’ve lost my mind, but the daddy life owns me currently.
Please send me your highest and best offer via PM or to my email jp@nlcloans.com, and I will be fair to all and get back to everyone within 24 hours. If I have not replied to your previous message- assume I did not see it and send again please.
Thank you everyone.
Last edited by coltboostin; 01-10-2017 at 10:39 PM.
Trending Topics
12-05-2016, 09:23 AM
#8
Car is worth every penny. Car was built right. I seen it a few years ago and it has only gotten faster since then. If you are looking for a built light weight car this is a very well put together car.
12-08-2016, 09:59 AM
#12
TECH Fanatic
Thread Starter
12-12-2016, 01:06 PM
#14
Teching In
iTrader: (11)
Join Date: Mar 2004
Location: Chicago
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm got me thinking... I was going to build one. I have a 44k 2002 slp SS drop top, all options possible with a 383ci, dart 225 heads, gt11 sleeper cam, k member, suspension, built t56, mcleod twin disc and more. Hmmmm thinking.
12-12-2016, 02:58 PM
#16
Teching In
iTrader: (11)
Join Date: Mar 2004
Location: Chicago
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Thank you sir! I love it! If i end up keeping it its getting a rear end. The 9inch that i could buy doesnt have abs. :'( Let me know if you are interested. Im in no rush, havent got to hit the track with it. Been to busy drop top cruisen and rolling foos. Haha I still have the original window sticker to the car.
