99 c5 FRC. Cam/ bolt ons. Trade?
01-11-2017, 07:07 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2014
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
99 c5 FRC. Cam/ bolt ons. Trade? Year: 1999
Make: Chevrolet
Model: Corvette
Price: $15000
Mileage: 116000
Private or Dealer Listing: Private Listing
Location (State): IN
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
I am putting my corvette out on the market to see what kind of offers and trades I can get. I do not have to sell, but I would like to get into something more track oriented and possibly free up some cash at the same time. With that being said I am mainly looking for partial trades.
I am interested in 78-81 g body malibus. 79-93 mustang coupe/ notchback, prefer a LS swapped car but ls rollers are welcome, two door boxtop Fairmont, 67-72 c10 SWB only or 72 and older nova.
My car is a 1999 chevy corvette hardtop coupe aka fixed roof coupe (FRC). It currently has 116k original miles, I am the third owner. Clean Indiana title with no accidents. LS1 engine, T56 mn6 transmission and 3.42 rear gear. Z51 suspension, active handling and traction control. Everything works as it should, the only downside to the car is minor paint imperfections. There is some small rock chips on the rockers in front of both rear wheels, along with a small scratch on the rear bumper and a couple minor scuffs on the front bumper. The paint still shines and looks good from 5ft its just not perfect, its a driver. There is a small seepage between the trans/diff, its common for the gaskets GM used to leak a little. It has done this the entire time ive owned the car and has never caused an issue.
MODS/MAINTENANCE:
TSP 233/239 .600/.600 112 lsa camshaft, ls2 timing chain, melling high pressure oil pump, ls7 lifters.
Fresh 243 casting cylinder heads, recent valve job, surface deck, professionally installed PRC dual spring kit good to .650 lift along with comp cam rocker upgrade. Cometic .045 head gaskets, ARP head bolts.
Rominac 25% underdrive pulley, ARP bolt and new belts. New water pump, idler and tensioner pulley. New rubber boots on steering rack, outer tie rods
LS6 intake, Ported throttle body, Racetronix 42lb injectors and Vararam cold air intake system. (approx. 2500 miles on every listed above)
LG super pro 1 3/4 long tube headers, catless X pipe, C5 Z06 Titanium catback exhaust. New 02 sensors with extensions. NGK tr55 spark plugs, MSD wires. (approx. 5000 miles on them)
LS7 clutch kit installed by previous owner about 30k miles ago. LG short shifter, drilled and slotted rotors installed around the same time as the clutch
TPS tunnel plate, C6 Z06 shocks, C6 Z51 sway bars with metal end links. (approx. 5000 miles on those)
Lowered all the way on stock bolts. C5 Z06 wheels and tires both in great shape
C6 black leather seats in great shape, loyd floor mats, tinted windows, clear corner lights, Z06 front screens etc. sure im forgetting something, I have receipts for a majority of the mods
the car was dyno tuned last spring by Justin may at Indiana muscle car. The car made 426rwhp/ 406rwtq. the tune is pretty good but could use a couple very minor adjustments to be perfect. still runs and drives great.
extras I could include for more $$
- McLeod twin disk clutch and flywheel
-c5 z06 slave cylinder, pilot bearing.
-12way qa1 front shocks
-pfadt trans mount/brace
-cowl hood
-stock 4l60e auto trans, torque tube, auto shifter and brake pedal.
- misc. stock parts and extra set of fuel rail covers.
PM with offers or text 574-299-6312 like I said I am not hurting to sell just looking to get into racing more and free up some cash. if I had to sell outright I would ask 15,000 firm.
Last edited by Rustang5.3; 01-12-2017 at 05:03 PM. Reason: added information
01-16-2017, 04:44 PM
#7
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2014
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Possibly interested in the right fbodies and cash. Prefer a built car with th400/powerglide setups
maybe a 4eyed mustang hatchback, really looking for something ready to race at the track while being street legal. Don't want anything caged, plan to weld that in myself
maybe a 4eyed mustang hatchback, really looking for something ready to race at the track while being street legal. Don't want anything caged, plan to weld that in myself
Trending Topics
02-21-2017, 08:49 PM
#11
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2014
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Will take a FBODY roller/ project with mods plus cash, preferred to not have a cage installed (a plus if it comes with one to install). Also interested in other street/strip rollers plus cash
