You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
1980 Chevy 2500 4x4. Truck runs and drives great. It has a built Chevy 400sb with large cam(not sure on specs), holly 750, full length headers, flowmaster 40's that dump just past the cab, th-350 trans with a 4,200 stall convertor and a np-205 transfer case out back. It has a dana 44 up front with large warn axles, warn locking hubs, and the biggest u-joints you can get. Out back it has a GM 14 bolt out of a 2002 chevy 2500 with disc brakes. It has 4.10 gears with lockers front and rear also. For suspension it has a 8 inch BDS lift kit. Tires maybe have a 75 miles on them and are 37.5" Super Swampers on Eagle alloy wheels. Truck has a 15 gallon rci fuel cell in the bed with electric fuel pump. Truck does have some rust but is really in pretty good shape for what it is. Drivetrain is solid as you can tell and this truck will go anywhere. Comes with alot of extras also. Front bumper is not on the truck right now because i was going to put stock bumpers on it.