GI: WTT 00 built WS6 for sport bike
05-19-2011, 03:21 PM
#1
GI: WTT 00 built WS6 for sport bike looking for possible trades straight across or partial for a late 2000's liter bike preferably, modded or not...
2000 ws6- 126000miles (georgia car until 2 years ago) prior salvage, professionally rebuilt
11's on motor, should go 10's easy on spray (only been sprayed twice on 100 shot)
for the right bike i will also throw in a built moser 9" with 4.11 spool, 31 spline axles, 1350 u joint, etc
car has one or two very small dents and next to NO scratches...immaculate paint and body
edelbrock stepped long tubes-
edelbrock ORY-
QTP elec cutout-
hooker CB-
799 heads-
patriot double springs, retainers, etc-
comp pushrods-
232/236 .591 .599 cam-
ls6 oil pump=
ls2 timing chain-
ls6 intake-
ported TB-
PERFORMABUILT stage II trans with custom 3800 stall-
42lb injectors-
Speed density tuned with hptuners (hptuners included with 4? credits)-
innovate lc1 wideband with gauge-
HSW microedge controller-
br7ef plugs-
NX carbon fiber wet kit-
bottle heater-
switch panel-
tinted tails-
tinted windows 20 all around-
tinted markers-
new battery-
NITTO NT05R drag radials, one track trip on them-
60% tread front kumho asx tires-
and much more im forgetting at the moment, lmk if any of you are interested thanks!
2000 ws6- 126000miles (georgia car until 2 years ago) prior salvage, professionally rebuilt
11's on motor, should go 10's easy on spray (only been sprayed twice on 100 shot)
for the right bike i will also throw in a built moser 9" with 4.11 spool, 31 spline axles, 1350 u joint, etc
car has one or two very small dents and next to NO scratches...immaculate paint and body
edelbrock stepped long tubes-
edelbrock ORY-
QTP elec cutout-
hooker CB-
799 heads-
patriot double springs, retainers, etc-
comp pushrods-
232/236 .591 .599 cam-
ls6 oil pump=
ls2 timing chain-
ls6 intake-
ported TB-
PERFORMABUILT stage II trans with custom 3800 stall-
42lb injectors-
Speed density tuned with hptuners (hptuners included with 4? credits)-
innovate lc1 wideband with gauge-
HSW microedge controller-
br7ef plugs-
NX carbon fiber wet kit-
bottle heater-
switch panel-
tinted tails-
tinted windows 20 all around-
tinted markers-
new battery-
NITTO NT05R drag radials, one track trip on them-
60% tread front kumho asx tires-
and much more im forgetting at the moment, lmk if any of you are interested thanks!
05-20-2011, 03:16 PM
#4
Also has ls7 lifters and I will include a factory fitted firebird car cover....I have had this car for roughly 3 years and only put 3k miles on it...was a 1 owner car when I got it with full service records (owned by an older man) and bone stock...the mods have very little miles on them...and damn near everything has been replaced...
