Western Members CA, AZ, NV, UT, CO, NM, HI

A big thanks to SRJ, on another successful motor swap.

Old 10-26-2009, 01:17 AM
  #1  
Staging Lane
Thread Starter
iTrader: (7)
 
DrifterFreak210's Avatar
 
Join Date: Jul 2008
Location: O.C.
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Default A big thanks to SRJ, on another successful motor swap.

The quick story: (pics bellow)

SRJ is the man and swapped out my busted motor for a newer one.. all in 36 hours, start to finish, with a good nights sleep in there as well as a few long car trips here and there for parts.

The longer story:

My motor was making a small ticking sound, my and trent (krazy4) pulled off the heads and replaced the lifters, put it back together and it made the same sound. We took it out for a drive and thats when the major knocking started. I believe it is a spun bearing. I'm not sure, either way it meant a new engine was in order.

Raul (Wickedbluess) came through with an offer of his brother's engine out of a 2000 ss. It had 50k miles on it, and came with the heads, but no acc nor and intake or oil pan. Jason was able to swap these over from mine though.
We got the engine over the night before jason started working.

Saturday Jason arrived at 630 to start working. By the time I got back from work at 4, he had just about everything on the newer engine and was working on the oil pan transfer. By the end of the night, at about 11, he had everything bolted onto the K member and ready to slide back under the car.

Today he came by at about 830 and resumed working. By the time I was back at 5, he already had fired up the engine and was working on refilling the oil after he ran some through to clean any crap left in the engine. by 6 we were out doing a roll race, and as expected he pulled on me. lol

The car runs great and Jason did an excellent job with the swap. He definitely exceeded all of my expectations and to anyone that needs a motor job done quick and around your schedule, he's definitely a great option.


A big thanks to Jason (ss.slp.ls1 aka SRJ), Raul (wickedbluess) and his brother and friends that were over to help load the engine, Trent (Krazy4) and everyone else that in someway loaned a needed part or answered some needed questions.



Picture time!



















Old 10-26-2009, 02:50 AM
  #2  
TECH Addict
iTrader: (76)
 
94'BLKBRD's Avatar
 
Join Date: May 2005
Location: SoCal
Posts: 2,977
Likes: 0
Received 0 Likes on 0 Posts

Default

SRJ gets down!
Old 10-26-2009, 10:43 AM
  #3  
Banned Village Idiot
iTrader: (36)
 
LS1BLKSS's Avatar
 
Join Date: Aug 2007
Location: Anaheim,CA
Posts: 2,551
Likes: 0
Received 1 Like on 1 Post
Default

SRJ you did this by yourself???
Old 10-26-2009, 10:56 AM
  #4  
TECH Senior Member
iTrader: (36)
 
ss.slp.ls1's Avatar
 
Join Date: Jan 2008
Location: Orange County, CA
Posts: 8,188
Received 26 Likes on 24 Posts

Default

Originally Posted by 94'BLKBRD
SRJ gets down!
Thanks.

Originally Posted by LS1BLKSS
SRJ you did this by yourself???
Yes, pretty much. Bobby did clean the oil pan, lol.
Old 10-26-2009, 11:46 AM
  #5  
Banned Village Idiot
iTrader: (36)
 
LS1BLKSS's Avatar
 
Join Date: Aug 2007
Location: Anaheim,CA
Posts: 2,551
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by ss.slp.ls1
Thanks.



Yes, pretty much. Bobby did clean the oil pan, lol.
fucken crazy *** srj!!!
Old 10-26-2009, 11:55 AM
  #6  
12 Second Club
iTrader: (5)
 
krazy4's Avatar
 
Join Date: Mar 2006
Location: Yorba Linda, CA
Posts: 1,457
Likes: 0
Received 3 Likes on 3 Posts

Default

Yeah, SRJ did pretty much everything lol.

Car runs good again!
Old 10-26-2009, 11:55 AM
  #7  
On The Tree
iTrader: (6)
 
FearTheDeer's Avatar
 
Join Date: Sep 2008
Location: Orange County, CA
Posts: 189
Likes: 0
Received 0 Likes on 0 Posts
Default

Thats a nice *** neighborhood
Old 10-26-2009, 11:58 AM
  #8  
12 Second Club
iTrader: (5)
 
krazy4's Avatar
 
Join Date: Mar 2006
Location: Yorba Linda, CA
Posts: 1,457
Likes: 0
Received 3 Likes on 3 Posts

Default

Originally Posted by FearTheDeer
Thats a nice *** neighborhood
HAHA, you would think, the countless shootings would say otherwise though.
Old 10-26-2009, 11:59 AM
  #9  
TECH Apprentice
iTrader: (4)
 
carbonfiberbird's Avatar
 
Join Date: Jan 2008
Location: Califronia
Posts: 350
Likes: 0
Received 0 Likes on 0 Posts
Default

awesome man I'm glad your cars up and running again! Did you ever get your paint job all straightened out at that shop?
Old 10-26-2009, 12:01 PM
  #10  
Launching!
iTrader: (16)
 
rzuff's Avatar
 
Join Date: Nov 2005
Location: Irvine,CA
Posts: 226
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ss.slp.ls1
Thanks.



Yes, pretty much. Bobby did clean the oil pan, lol.

Where did you get those jackstands and how hi do they go. Pretty much plan to do the same thing with my 04 but at least a motor isn't in there to start with !
Old 10-26-2009, 12:05 PM
  #11  
12 Second Club
iTrader: (5)
 
krazy4's Avatar
 
Join Date: Mar 2006
Location: Yorba Linda, CA
Posts: 1,457
Likes: 0
Received 3 Likes on 3 Posts

Default

Originally Posted by rzuff
Pretty much plan to do the same thing with my 04!
It's awesome, you actually have room to move lol.
Old 10-26-2009, 12:05 PM
  #12  
Staging Lane
Thread Starter
iTrader: (7)
 
DrifterFreak210's Avatar
 
Join Date: Jul 2008
Location: O.C.
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by LS1BLKSS
SRJ you did this by yourself???
Yeah, pretty much 99% of the work was done flying solo.

Originally Posted by FearTheDeer
Thats a nice *** neighborhood
Why thank you, they are quite nosy though and did not like my car sitting there while this was done. I can't begin to count how many neighbors walked by absolutely stunned seeing this happen in a driveway.

Originally Posted by carbonfiberbird
awesome man I'm glad your cars up and running again! Did you ever get your paint job all straightened out at that shop?
Yeah, apparently third time is the charm lol. But its the color I wanted now and its a pretty decent job for being maaco.
Old 10-26-2009, 12:19 PM
  #13  
TECH Senior Member
iTrader: (36)
 
ss.slp.ls1's Avatar
 
Join Date: Jan 2008
Location: Orange County, CA
Posts: 8,188
Received 26 Likes on 24 Posts

Default

Originally Posted by rzuff
Where did you get those jackstands and how hi do they go. Pretty much plan to do the same thing with my 04 but at least a motor isn't in there to start with !
Those are 7 ton jack stands, they are beefy stands. I believe I got them at Autozone. They go just high enough on the highest setting to roll out the engine and trans like pictured.
Old 10-26-2009, 02:24 PM
  #14  
Banned Village Idiot
iTrader: (36)
 
LS1BLKSS's Avatar
 
Join Date: Aug 2007
Location: Anaheim,CA
Posts: 2,551
Likes: 0
Received 1 Like on 1 Post
Default

oh **** you guys don't use a cherry picker?
Old 10-26-2009, 02:39 PM
  #15  
On The Tree
 
Blk99ek's Avatar
 
Join Date: Mar 2009
Location: Catoosa Ok
Posts: 169
Likes: 0
Received 0 Likes on 0 Posts
Default

thats awesome, congrats
Old 10-26-2009, 02:44 PM
  #16  
TECH Senior Member
iTrader: (36)
 
ss.slp.ls1's Avatar
 
Join Date: Jan 2008
Location: Orange County, CA
Posts: 8,188
Received 26 Likes on 24 Posts

Default

Originally Posted by LS1BLKSS
oh **** you guys don't use a cherry picker?
Yes I did. You lift the body up with a cherry picker and then you set the body down on those 7-ton jack stands. That allows you to unhook and move the cherry picker out of the way. Otherwise you couldn't slide the engine and trans out.
Old 10-26-2009, 03:21 PM
  #17  
TECH Addict
iTrader: (3)
 
hlaalu's Avatar
 
Join Date: Oct 2007
Location: Orange County
Posts: 2,543
Likes: 0
Received 0 Likes on 0 Posts
Default

jason is a machine.
Old 10-26-2009, 03:49 PM
  #18  
Banned Village Idiot
iTrader: (36)
 
LS1BLKSS's Avatar
 
Join Date: Aug 2007
Location: Anaheim,CA
Posts: 2,551
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by ss.slp.ls1
Yes I did. You lift the body up with a cherry picker and then you set the body down on those 7-ton jack stands. That allows you to unhook and move the cherry picker out of the way. Otherwise you couldn't slide the engine and trans out.
i asked since i didn't see one in the pic... but its in the back
Old 10-26-2009, 03:58 PM
  #19  
TECH Enthusiast
iTrader: (21)
 
LS1Adam84's Avatar
 
Join Date: Nov 2008
Location: Franklin, TN
Posts: 510
Likes: 0
Received 1 Like on 1 Post

Default

Alright yeah bobby I had heard there was some fun that happened after starting it up I am sorry i never could get down to listen to the car, glad it is fixed though SRJ is the man.

SRJ I didn't forget about your rocker arm bolts, still tryin to track down one for ya.
Old 10-26-2009, 04:26 PM
  #20  
TECH Senior Member
iTrader: (36)
 
ss.slp.ls1's Avatar
 
Join Date: Jan 2008
Location: Orange County, CA
Posts: 8,188
Received 26 Likes on 24 Posts

Default

Originally Posted by LS1Adam84
Alright yeah bobby I had heard there was some fun that happened after starting it up I am sorry i never could get down to listen to the car, glad it is fixed though SRJ is the man.

SRJ I didn't forget about your rocker arm bolts, still tryin to track down one for ya.
Actually I don't need them anymore. It's cool.

Thread Tools
Search this Thread
Quick Reply: A big thanks to SRJ, on another successful motor swap.



All times are GMT -5. The time now is 04:17 AM.