Selling my 2000 6.0 built turbo sierra what do you think its worth?
11-26-2014, 09:11 AM
#1
Registered User
Thread Starter
Join Date: Nov 2014
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Selling my 2000 6.0 built turbo sierra what do you think its worth? Please let me know what you guys think its worth.
I have a 2000 GMC Sierra Turbo Truck, It's a Sleeper truck and at first glance you don't think nothing about it till you stomp the gas. Has A built 6.0 motor which alone is 420Hp and than you add the 72mm Turbo and than its So long. It's a 11 second truck all day long that you can drive to Home Depot if need be with a/c on if you want. It took me 2 years to build this truck. Like I Said I have built this truck for 2 years and have roughly 18000 in it and not one thing is stock on it. ALL parts and I mean ALL parts from engine to radiator to A/C compressor have less than 200 miles on them. For the most part the truck is super clean about a 9-10, has a ding on the passenger side right back near the rear bumper ( picture below) and also on the front bumper its missing some paint (Picture Below) other than those things the truck is SUPER clean, Paint is shiny Interior is flawless, no rips or tears, (Dirty In pictures as I have not had time to vacuum it, But Ill clean it up before bought. I will list what's all done to it and what needs to be finished on it which isn't much at all. Runs and Drives Now and Passed Emissions On 11-15-2014 so its good for a year.
Engine
1.Built 6.0 By Pro-1 Automotive and was built off a Car Craft Magazine Car and was tested at 444 hp and 456 foot pounds of Torque (Just Motor)
2.Bored .030 over
3.mahle Pistons
4.STD rods/mains
5.Clevite Bearings
6.Comp Hyd Roller 54-4 12-11 Cam Grid
7.XR265, 1200-6000, 265/271,212/218.522/529, lobe sep angle
8.Comp Lifters
9.Complete Valve Job
10.Turbular Cross Member
11.Surface Cut heads Melling Oil Pump
12.Melling Timing
13.Arp Head Studs
14.Zr1 Head Gaskets
15.Stock Rockers
Transmission-
Built 4L80E had the stock 4l60 e but We all know that would not hold up so put the 4L80E in but went ahead and built the trans to hold the power. Shifts hard and used nothing but the best parts.
1.Trans go2 shift kit
2.Circle D Torque Converter 278mm
3.Has the best Clutches you can buy In the transmission.
4.TRU-Cool Max 40,000 Automatic Transmission Fluid Oil Cooler
5.Stainless Wrapped Braided Lines
Turbo-
1. Tricks Performance Stage 2
2. 72mm Turbo
3. Air to Air Intercooler Kit
4. Blow Off Valve and waste gate cant remember what size but whatever comes with the kit.
Fuel System
1.60 Pound Injectors
2.Racetronics Float and Fuel Pump Combination
I know I am Forgetting a lot of stuff. Has a lot of other new parts from radiator to a/c compressor right down to every hose is all brand new and has less than 200 miles on them and that's pushing it. I just got the truck done and I have not even had time to Enjoy it. I just don't have the time anymore to finish it and the money right now because of the holidays.
Heres what it Needs to be Finished and Perfect
1. Desperately Needs to be tuned( yes it runs and drives but it needs to be tuned bad.
2. Has a exhaust leak and needs to be fixed.
3. Not taking all the boost, Keeps blowing it out, starts off like a bat out of hell than blows the boost out, Dont know if its the exhaust leak or can be fixed with a tune.
Other than that its ready to Roll. You can come pick it Up and drive it home now as it is. Has current emissions as of Saturday So its ready to Rock.
I have a 2000 GMC Sierra Turbo Truck, It's a Sleeper truck and at first glance you don't think nothing about it till you stomp the gas. Has A built 6.0 motor which alone is 420Hp and than you add the 72mm Turbo and than its So long. It's a 11 second truck all day long that you can drive to Home Depot if need be with a/c on if you want. It took me 2 years to build this truck. Like I Said I have built this truck for 2 years and have roughly 18000 in it and not one thing is stock on it. ALL parts and I mean ALL parts from engine to radiator to A/C compressor have less than 200 miles on them. For the most part the truck is super clean about a 9-10, has a ding on the passenger side right back near the rear bumper ( picture below) and also on the front bumper its missing some paint (Picture Below) other than those things the truck is SUPER clean, Paint is shiny Interior is flawless, no rips or tears, (Dirty In pictures as I have not had time to vacuum it, But Ill clean it up before bought. I will list what's all done to it and what needs to be finished on it which isn't much at all. Runs and Drives Now and Passed Emissions On 11-15-2014 so its good for a year.
Engine
1.Built 6.0 By Pro-1 Automotive and was built off a Car Craft Magazine Car and was tested at 444 hp and 456 foot pounds of Torque (Just Motor)
2.Bored .030 over
3.mahle Pistons
4.STD rods/mains
5.Clevite Bearings
6.Comp Hyd Roller 54-4 12-11 Cam Grid
7.XR265, 1200-6000, 265/271,212/218.522/529, lobe sep angle
8.Comp Lifters
9.Complete Valve Job
10.Turbular Cross Member
11.Surface Cut heads Melling Oil Pump
12.Melling Timing
13.Arp Head Studs
14.Zr1 Head Gaskets
15.Stock Rockers
Transmission-
Built 4L80E had the stock 4l60 e but We all know that would not hold up so put the 4L80E in but went ahead and built the trans to hold the power. Shifts hard and used nothing but the best parts.
1.Trans go2 shift kit
2.Circle D Torque Converter 278mm
3.Has the best Clutches you can buy In the transmission.
4.TRU-Cool Max 40,000 Automatic Transmission Fluid Oil Cooler
5.Stainless Wrapped Braided Lines
Turbo-
1. Tricks Performance Stage 2
2. 72mm Turbo
3. Air to Air Intercooler Kit
4. Blow Off Valve and waste gate cant remember what size but whatever comes with the kit.
Fuel System
1.60 Pound Injectors
2.Racetronics Float and Fuel Pump Combination
I know I am Forgetting a lot of stuff. Has a lot of other new parts from radiator to a/c compressor right down to every hose is all brand new and has less than 200 miles on them and that's pushing it. I just got the truck done and I have not even had time to Enjoy it. I just don't have the time anymore to finish it and the money right now because of the holidays.
Heres what it Needs to be Finished and Perfect
1. Desperately Needs to be tuned( yes it runs and drives but it needs to be tuned bad.
2. Has a exhaust leak and needs to be fixed.
3. Not taking all the boost, Keeps blowing it out, starts off like a bat out of hell than blows the boost out, Dont know if its the exhaust leak or can be fixed with a tune.
Other than that its ready to Roll. You can come pick it Up and drive it home now as it is. Has current emissions as of Saturday So its ready to Rock.
11-26-2014, 11:33 AM
#6
Registered User
Thread Starter
Join Date: Nov 2014
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
No its got a mail in order tune on it to get it to pass emissions, Truck has been driven to the emissions place once, to the parts store once and to the tag office once and to my shop to sit till it sells or till after the holidays when i get my money back up to get it all squared away.Truck has less than 200 miles on it since build and thats pushing it.
Trending Topics
11-28-2014, 01:24 PM
#8
Hate to say it but you have a couple things going against you right now. Like you, With Christmas around the corner not many people have the money and aren't looking for Vehicles. This is the time I like to buy and hold until tax time (spring) and resell at a good profit.
Many people want a truck to be used as a truck, Not a sleeper. Seems like in my area everyone wants lifted 4x4 preferably diesel.
It'll probably sell come tax time for sure but I have no idea at what price there are just to many factors to consider. I would say list it a little higher than what you'd settle for and see of you get any bites.
Many people want a truck to be used as a truck, Not a sleeper. Seems like in my area everyone wants lifted 4x4 preferably diesel.
It'll probably sell come tax time for sure but I have no idea at what price there are just to many factors to consider. I would say list it a little higher than what you'd settle for and see of you get any bites.
