Pics of After Market Rims on Red Trans Am's!!!
#84
#90
Teching In
iTrader: (3)
Join Date: May 2008
Location: Mobile AL
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Yeah ZX3 steplip in gunmetal, I'm still unsure of the look of it. I really like it but think I might change it once I go thru my tires. Maybe black center with anodized red lip?
I was going to go this route but after dropping the coin on the MWC rear, watts link, zx3's & R888 I just coudn't get myself do it. Maybe next year.
I was going to go this route but after dropping the coin on the MWC rear, watts link, zx3's & R888 I just coudn't get myself do it. Maybe next year.
#91
TECH Apprentice
Join Date: Feb 2005
Location: Newark,DE
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
Car looks good man and the gunmetal looks better then the black would. Black hides to much spoke detail. How much is your rear narrowed? 3"? I'm shooting for 2 1/2" narrowed to do a deep concave with a 3 1/2" lip. Hoping to get the rear done this weekend so I can finalize my offset numbers and complete the order.
#92
Teching In
iTrader: (3)
Join Date: May 2008
Location: Mobile AL
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the compliment.
The rear in narrowed 3" per side, rims are 18x11 with 315 30 18 / Toyo R888.
Are you purchasing your Forgelines thru Tony (8 Ball)?
Post pic, should look sick.
The rear in narrowed 3" per side, rims are 18x11 with 315 30 18 / Toyo R888.
Are you purchasing your Forgelines thru Tony (8 Ball)?
Post pic, should look sick.
#93
TECH Apprentice
Join Date: Feb 2005
Location: Newark,DE
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
Yes I am. I have been driving Tony and Mark at Forgeline crazy with questions. Just trying to get the right look.
What offsets did you decide on and what is your front wheel width? I am looking at 19x9F with 35mm and a 19x10.5 with a 43mm stock width. Narrowing by 2.5" should come out to around a -20mm
What offsets did you decide on and what is your front wheel width? I am looking at 19x9F with 35mm and a 19x10.5 with a 43mm stock width. Narrowing by 2.5" should come out to around a -20mm
#98
#100
On The Tree
Join Date: May 2018
Location: Coldmonton, Snowberta,Canada
Posts: 125
Received 0 Likes
on
0 Posts
backspacing for these rims ?
19" Roh Drift Rs. 19x9 front, 19x10 rears. 275s front, 295s rear.
Attachment 617098
Attachment 617099
Attachment 617098
Attachment 617099