Vertini Riviera-S Wheels(not TT2's or Z06's)
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Posts: 1,613
Likes: 0
Received 0 Likes
on
0 Posts
Vertini Riviera-S Wheels(not TT2's or Z06's)
What do you guys think? They come either in hypersilver or hypersilver face with the inner spokes in black. Such as shown below. These would be going on my black WS6.
They come in the following offsets and im 99% sure I knoow the offsets but wanted to make sure with others.
Here are the offsets
Front Wheels
Bolt Pattern Offset
5x112 32
5x120 40
5x120 15
5x4.5/114.3 35
5x4.5/114.3 20
Rear Wheels
Bolt Pattern Offset
5x112 35
5x4.5/114.3 35
5x120 45
5x120 22
5x4.5/114.3 25
5x4.5/114.3 37
They come in the following offsets and im 99% sure I knoow the offsets but wanted to make sure with others.
Here are the offsets
Front Wheels
Bolt Pattern Offset
5x112 32
5x120 40
5x120 15
5x4.5/114.3 35
5x4.5/114.3 20
Rear Wheels
Bolt Pattern Offset
5x112 35
5x4.5/114.3 35
5x120 45
5x120 22
5x4.5/114.3 25
5x4.5/114.3 37
Trending Topics
#9
TECH Fanatic
iTrader: (65)
Join Date: Jun 2006
Location: OKC
Posts: 1,188
Likes: 0
Received 0 Likes
on
0 Posts
The correct offset depends on the width. If you can give us that then we might be able to recommend an offset. Or you can figure it out yourself easily enough from the sticky at the top of the forum.
#12
TECH Enthusiast
iTrader: (1)
Join Date: May 2006
Location: Elmhurst, IL
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
i would also like to know the offset for 18x9s and 18x10s
I need to replace my 18x8s....they are just too skinny
i wish the insides weren't black though....and they don't make the hp evos anymore, which sucks *****.
I need to replace my 18x8s....they are just too skinny
i wish the insides weren't black though....and they don't make the hp evos anymore, which sucks *****.