had a little problem
06-27-2009, 09:45 PM
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
had a little problem so last night i was gonna put my slicks and skinnies on. i have the arp extended wheel studs for all corners. 12mm thread for a late model f body.
so fronts go on perfect, wheel goes on smoothly and no grinding what so ever.
time for the rears. the part of the stud with the splines seems to be too thin, and they go all the way without tightening them.
whats the deal?
i have a 9in rear end, does that change things?
im going to the shop to bring them the stock rear ones and have them measure it so i can buy the right studs.
this ever happen to anyone?
so fronts go on perfect, wheel goes on smoothly and no grinding what so ever.
time for the rears. the part of the stud with the splines seems to be too thin, and they go all the way without tightening them.
whats the deal?
i have a 9in rear end, does that change things?
im going to the shop to bring them the stock rear ones and have them measure it so i can buy the right studs.
this ever happen to anyone?
