Cool28

iTrader: (2)

I plan on narrowing my rear 3inchs on each side on the firebird. I haven't seen any 18x12 inch rims pics yet and was wonder if they will fit at stock height and maybe lowered a inch. There be wrapped with 335s also.

Cool28

iTrader: (2)

The rubber will be bfg t/a kdw 2.

SHovV

iTrader: (1)

18x12's here. You'll need Wolfe Racecrafts off set lower control arms and thier mini tub kit. Here's a link to my 18x12 - mini tub thread
http://www.yellowbullet.com/forum/sh...d.php?t=264256

Cool28

iTrader: (2)

So I'll have to mini tub for sure?

SHovV

iTrader: (1)

Unless you wanna look like Joe dirt. Yes a mini tub is needed to tuck the wheels inside the wheel wells with enough room for suspension travel that nothing rubs. I have 2 inches of clearance between the inside of my wheel and the inner most wheel well

Cool28

iTrader: (2)

Damn didn't want to do all that. Does the inside panels still fit?

69TA

iTrader: (263)

biggest you can go is 11.5 and you will need them offset bars

I have a new pair of Wolfe offset bars
for sale

SHovV

iTrader: (1)

Yeah. My seats and interior panels still fit. I only need to do some minor trimming on the panels

Twotonefreak

iTrader: (11)

Yea since you are narrowing the rear, it'll def need mini tub.

SHovV

iTrader: (1)

You don't need to mini tub for a narrow rear. Only for wider wheel/tire combos. Narrowing a rear will only affect the offset needed to center a wheel

carlos64030

iTrader: (5)

I plan on installing some mini-tubs too. Which areas are you trimming? Do you have any pics?

Cool28

iTrader: (2)

Back to the top for pics