vbls

iTrader: (17)

i bought 15x10 race stars with 275-50-15 et streets, they sit about a half inch from the bump stops, which is ok i guess, so i started it and put it in gear and they are rubbing the damn caliper, anybody have this problem????

ilovechevy1

iTrader: (4)

this is a common problem when switching to racing rims..it usually is only on the front from what i have seen...most ppl just see where the rub spot is and take a grinder to it and grind it down..grind in a lil then put rim back on and redo if nessary until it stops rubbing...only take off what you need and take your time on it

projectX

iTrader: (51)

Race stars are not suppose to rub at all...

vbls

iTrader: (17)

they are race stars, and they rub. 15x10 with 7.5 backspacing

vbls

iTrader: (17)

ill try to grind on them tomorrow

JohnnyBz28

iTrader: (12)

I have 15x10's and 15x4's

They rubbed on the little fins on the calipers. It took a total of 20 minutes to get them to fit.

Sales1@Texas-speed

Yea Ive heard of people having slight clearance issues and some with no issues at all. You shouldnt have to remove much to get them to clear.

fatlt1

iTrader: (4)

on ls cars they will slightly still, on lt1 cars they will not. it will literally take 5 mins on each side to clear em.

joblo1978

iTrader: (14)

Calipers and their flashing vary, as do wheels and the amount of roundness. I had to work my rears a little for my RTS's. No big deal. Just takes awhile.

Tip, slide a piece of paper in between the hoop and the caliper to identify exactly where it is rubbing, get grinding with a nice carbide drill bit, repaint the caliper.

vbls

iTrader: (17)

i grinded very little off, awesome fit now....

vbls

iTrader: (17)

ill have pics when the fronts are on

boss79z

iTrader: (1)

Same thing on my old rims. Just grinded a little on the fins and it was perfect. Rear only!

projectX

iTrader: (51)

Race star rims look awesome!

ilovechevy1

iTrader: (4)

awesome..got any pics with them on ?

1Bad97WS-6

iTrader: (3)

Where can I get a pic of the fin ya are talking about. I want to get theses wheels andI don't want to grind anymore on my calipers. I had to grind for my weld pro stars and they are sligh rubbing still that's why I never used them..

sweet99ss

iTrader: (41)

If you already grinded slightly on them for prostars you will not have to worry about grinding with the race stars.

vbls

iTrader: (17)

it took me 10 minutes on each side with an angle grinder

BOBS99SS

iTrader: (2)

yeah , all the people that say im not grinding , ill just by better wheels, news flash ,,,, you still might have to grind, might not be as much ,but you still do, i like the racestars i was just not a fan of there one size fits all approach lol, you have any pics yet, cant post a question about new wheels and not show us the goods