Trying to figure out
#1
TECH Apprentice
Thread Starter
iTrader: (13)
Join Date: Jan 2008
Location: godley
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
Trying to figure out
What wheel will work best for 315's with the rear I have. The car has the fenders rolled, bump stops removed and bfh mod. I measured from flange to flange with a stock set of rotors on and also did the same on my othercar with a stock rear. Here's what I got
60 1/8 flange to flange w stock rotor
Stock is 64 15/16
4.8125 difference or
2.40625 per side.
That's done with a couple straight edges and a fat max tape.
I posted in the rear end section too. Just want to get it right. I pretty much never have time when I have money and vise versa but next few weeks will be back on target.
60 1/8 flange to flange w stock rotor
Stock is 64 15/16
4.8125 difference or
2.40625 per side.
That's done with a couple straight edges and a fat max tape.
I posted in the rear end section too. Just want to get it right. I pretty much never have time when I have money and vise versa but next few weeks will be back on target.