Black Chrome CCW's?
#1
Teching In
Thread Starter
Join Date: Jun 2008
Location: San Diego, CA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Black Chrome CCW's?
So I ordered a set of CCW 19x10/19x11 505a's for my Z28...Im really excited about getting them on but after talking to the guy from CCW, he mentioned that since Im in an area prone to Salt water and winter conditions, the wheels are susceptible to corrosion w/out protection. I have an idea to get them 'Permachromed" Black Chrome....My car is black and I think they would look great. Anyone every see or have pic's of black chrome on a Camaro? Any thoughts or opinions?
Trending Topics
#9
TECH Fanatic
Salt is evil. They ruined my chrome C6 vette replica wheels in one winter just being parked in my appartment parking lot. The landlord salted the parking lot and plowed snow around my TA.
#10
Teching In
Thread Starter
Join Date: Jun 2008
Location: San Diego, CA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Torn
Thnaks for the replies guys...I am still torn on what to do, either black chrome or just clear powder coat them. I wish I could see what some looked like on a black camaro.
#15
The good thing about powder coating is paint stripper will remove it and not hurt your wheels. Personally I would leave them as, BUT if they powder coat them black chrome over the polished wheel you could remove it later if you wanted.
I fist did his chrome smoke(gun metal looking) and he didn't like it, so I removed it to do them black chrome
I JUST did a set of ZR1's(that were chrome) black chrome. I will see if he can put a pic up...
I fist did his chrome smoke(gun metal looking) and he didn't like it, so I removed it to do them black chrome
I JUST did a set of ZR1's(that were chrome) black chrome. I will see if he can put a pic up...
#16
TECH Senior Member
iTrader: (27)
You could always go with the hyperblack finish. Not sure if doing only the center is an option, but that would look killer. Keeping the lips polished shouldn't be too much trouble. My theory is if you're going to drop that much coin on some bad *** wheels, then don't be lazy and keep them polished up. I polish mine pretty much everytime I drive it. Mine is not a daily driver, but since yours is, one a week should be good.
#17
On The Tree
iTrader: (20)
Join Date: Mar 2003
Location: Raleigh, NC
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
The good thing about powder coating is paint stripper will remove it and not hurt your wheels. Personally I would leave them as, BUT if they powder coat them black chrome over the polished wheel you could remove it later if you wanted.
I fist did his chrome smoke(gun metal looking) and he didn't like it, so I removed it to do them black chrome
I JUST did a set of ZR1's(that were chrome) black chrome. I will see if he can put a pic up...
I fist did his chrome smoke(gun metal looking) and he didn't like it, so I removed it to do them black chrome
I JUST did a set of ZR1's(that were chrome) black chrome. I will see if he can put a pic up...
I like it...truely a unique look on this type of wheel.