BBS on a 4th Gen???? Anyone?
10-02-2012, 10:14 PM
#1
TECH Apprentice
Thread Starter
Join Date: Feb 2005
Location: Newark,DE
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
BBS on a 4th Gen???? Anyone? Anyone ever put BBS wheels on a 4th gen? I heard rumors a few years ago that the BMW bolt pattern was close enough but never saw proof that it could be done. BBS makes a nice killer looking wheel. Something in a gunmetal or titanium color wide mesh would look sick on a white T/A.
10-03-2012, 11:28 AM
#7
TECH Apprentice
Thread Starter
Join Date: Feb 2005
Location: Newark,DE
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
a set of F1 or CH-R in titanium would look sich on a white car. there is a shot of a white BMW there with F1's and it looks really good.
67 goatman, you mentioned yours has a bmw bolt pattern. was this a conversion or you just used BMW wheels?
Bo jangles,
thats what im talking about, they apear to stick out past the fender though. is that the case or just the picture angle? What size and offsets are they?
67 goatman, you mentioned yours has a bmw bolt pattern. was this a conversion or you just used BMW wheels?
Bo jangles,
thats what im talking about, they apear to stick out past the fender though. is that the case or just the picture angle? What size and offsets are they?
Trending Topics
10-03-2012, 04:27 PM
#9
Just the angle, car needs to go about an inch lower...
The rims are vette offset 17x9 and 18x10.5
Fronts 275/40/17 and 315/35/18 rears
Last time I talked to bbs about the they aren't in
production anymore at least in this size...
The rims are vette offset 17x9 and 18x10.5
Fronts 275/40/17 and 315/35/18 rears
Last time I talked to bbs about the they aren't in
production anymore at least in this size...
Last edited by bojangles; 10-03-2012 at 04:34 PM.
[/IMG]
10-12-2012, 04:09 PM
#13
^^^ badass nice to see some more lms on a 4th gen!
I reverse mounted the centers to avoid using a spacer,
wich didn't really help all that much since I still had to
relocate the bumpstops to get the 315s to fit...
I reverse mounted the centers to avoid using a spacer,
wich didn't really help all that much since I still had to
relocate the bumpstops to get the 315s to fit...
