1SCKLS1

iTrader: (5)

i have a 99 camaro ss looking at ccw classics 17x11 with a 325 size radial on it my car is lowered 1.5 just wondering if i would have any fitment problems? i have the zr1 17x11 with 315 fit perfect

Burt_NaSSty

Did you already beat the fender wells in?

1SCKLS1

iTrader: (5)

no I haven't

Rise of the Phoenix

iTrader: (27)

I had CCW 505a's, 19x10 fronts and 20x11 rears, and I ran a 325 size tire on the back. I had to beat the inner fender some to get them to clear. Not much though. Everything else was good.

Snake_Skinner

iTrader: (12)

What about rolling the fenders, is it necessary to roll the fenders on a f-body with 19 X 11 505a's( 305 nittos) out back lowered on BMR springs? I got a small spacer and already did bfh mod, but was just curious If rolling the fenders was a necessity also or more of a precaution.

Rise of the Phoenix

iTrader: (27)

I would say yes since you are lowered. I was not lowered, so I didn't need to.

WSTEXAS

iTrader: (1)

its a highly recommended thing to roll your fenders before you start cutting into your tires and you get a blow out